AccentGlowLED
Hasn't posted much yet...
Originally I created this mod for the Sonata, and because of popular demand I've created it for a few more cars including the Genesis Coupe! This mod was created for function as well as style. It allows you to see your cup holders at night and looks really cool in the process! The lights match the blue Hyundai interior lighting and the cup holders turn on and off with the headlights.
It’s a completely do-it-yourself install and you only need some minor tools. It’s easy! I now produce these kits and can ship them out to you for you to install. PM me to order or email me!
I am also on eBay! The kits are $45 shipped and I make them for the 2010-2012 Genesis Coupe as well as the 2013+Up Genesis Coupes (2013 kit comes with slightly different instructions)
Read these instructions completely before beginning installation
AccentGlowLED does not assume responsibility and disclaims liability for damage, loss, or expense arising from improper use, operation, or installation of this product.
You may need the following tools:
· Plastic panel popper tool (Harbor Freight.com #67021)
· Small Flathead Screwdriver
· Phillips Screwdriver
· 10mm Nutdriver or Socket
· 3/16” Drill Bit (or larger)
· Razor Blade
· Wire Strippers (I use something similar to the Irwin 2078300) and Crimpers or other wire attachment method
· Electrical Tape
Disassembly:
-Begin by removing the panels on either side of the console (highlighted in A). To remove passenger side, grab the part closest to the console (B1) and pry straight out. Afterwards slide the cover backwards to disengage it from the retainer stud (B2), repeat on the driver side. Remove the 10mm bolt on both sides (C).
A
B
C
-Manual Transmission: Unbutton shifter boot (D) (alternately you can unscrew shifter handle) then grab the inside of the shifter trim cover nearest the rear (E1) and pull straight up and then carefully slide it rearwards to disengage the front of it (E2). Slide it up past the shifter knob. Auto Transmission: Use a plastic pry tool to carefully pop up the shift console the same way as step E (E1 & E2).
D
E
-Remove the 4 phillips head screws pictured (F). Engage parking brake and remove plastic cover (G) by prying upwards with plastic pry tool.
F
G
-Next open the center console and pull out the carpet (H) and then remove two 10mm bolts (I). Pull the entire console backwards a bit and we need to unplug the large white plug to the right of the shifter (J). Now you can carefully lift out the entire rear center console, start with the back and lift straight up and then the front, remove from vehicle.
H
I
J
It’s a completely do-it-yourself install and you only need some minor tools. It’s easy! I now produce these kits and can ship them out to you for you to install. PM me to order or email me!
I am also on eBay! The kits are $45 shipped and I make them for the 2010-2012 Genesis Coupe as well as the 2013+Up Genesis Coupes (2013 kit comes with slightly different instructions)
Installation Instructions
2010-2012 Hyundai Genesis Coupe
(2013+Up Genesis Coupe instructions slightly different, although kit is the same)
2010-2012 Hyundai Genesis Coupe
(2013+Up Genesis Coupe instructions slightly different, although kit is the same)
Read these instructions completely before beginning installation
AccentGlowLED does not assume responsibility and disclaims liability for damage, loss, or expense arising from improper use, operation, or installation of this product.
You may need the following tools:
· Plastic panel popper tool (Harbor Freight.com #67021)
· Small Flathead Screwdriver
· Phillips Screwdriver
· 10mm Nutdriver or Socket
· 3/16” Drill Bit (or larger)
· Razor Blade
· Wire Strippers (I use something similar to the Irwin 2078300) and Crimpers or other wire attachment method
· Electrical Tape
Disassembly:
-Begin by removing the panels on either side of the console (highlighted in A). To remove passenger side, grab the part closest to the console (B1) and pry straight out. Afterwards slide the cover backwards to disengage it from the retainer stud (B2), repeat on the driver side. Remove the 10mm bolt on both sides (C).
A
B
C
-Manual Transmission: Unbutton shifter boot (D) (alternately you can unscrew shifter handle) then grab the inside of the shifter trim cover nearest the rear (E1) and pull straight up and then carefully slide it rearwards to disengage the front of it (E2). Slide it up past the shifter knob. Auto Transmission: Use a plastic pry tool to carefully pop up the shift console the same way as step E (E1 & E2).
D
E
-Remove the 4 phillips head screws pictured (F). Engage parking brake and remove plastic cover (G) by prying upwards with plastic pry tool.
F
G
-Next open the center console and pull out the carpet (H) and then remove two 10mm bolts (I). Pull the entire console backwards a bit and we need to unplug the large white plug to the right of the shifter (J). Now you can carefully lift out the entire rear center console, start with the back and lift straight up and then the front, remove from vehicle.
H
I
J
