dyno

I recently installed some electric dump valves on my G70 and had it dyno'd with the JB4 on Map 0, Map 2, then Map 2 with the Dumps open. Here is the full review, my thoughts, and install pics. JB4 - installed several months ago and has been a fun addition. I bought the 450HP kit with Denzo...

Check it out, it's cool to watch. This power output is bone stock. Genesis claims 375hp, but what is it really? YouTube GV80 Dyno Test Link What do you think the 3.5TT is capable of? I am completely shocked at the extreme gains. Burger Motorsports offers an inexpensive system for extreme...

I got around to dynoing my 2.0T g70 (Manual) with a jb4. I am running stock plugs and 91 octane gas. First dyno graph is stock vs map 1. second is I did a run with map 2 ( with stock plugs and 91 octane) It had more power down low but then petered out. I assume due to lack of 93 octane.

I had my first track day with the Genesis Sedan today at Thunderhill Raceway for a Speed Dynamics event (great group!). I wasn't trying to push the car too hard but got noticeably faster throughout the day and the upgraded brakes didn't fade one bit. I also got a chance to dyno the car with the...

5.0 Ultimate too advanced to DYNO!?! Smoking tire, w/video I had the chance to DYNO my 5.0 Ultimate at a friends auto performance tuning shop over the weekend. Unfortunately, the Genesis is SO advanced we could not get it to dyno. I was hoping for 340HP at the wheels. Here is the setup and...

I went ahead and drew up my interpretation of how the 2015 Tau v8 should perform on a real dyno in comparison to the last gen 5.0. I basically added a little more torque @ an earlier rpm while also making the horsepower max earlier based on hyundais claimed figures. From what i see the everyday...

So I finally got a chance to throw my 4.6L on the dyno at my office tonight. I posted recently about a track outing that the car ran a conservative 14.2 as I didn't want to push it to the limits on the launch and was asked if I can get some dyno results since I have easy access to a dyno and...

Tomorrow I'm putting the sedan on a dyno 100% stock! Hyundai says 333hp and 291tq but I'll give my results as to what's at the wheels just for fun!

While stuck in Atlanta traffic, I was thinking, wouldn't it be nice to be able sample a HUD on the R-Spec, similar to 2015 Ultimate? Once I got home, found couple of bits needed to demonstrate this mod. Before I start, I would like to dedicate this thread to all the modders , from the people...

This was done on a DYNOmite Dynometer at TPIS in Chaska, MN. This dyno has you jacking the rear, removing wheels and attaching dyno modules to each rear hub. My first run was the best. Unfortunately, forgot to print this run result. Car had numerous power reductions with torque management...

Just a baseline pull on the 5.0 before the wide-band gets welded in. New to the Genesis community coming from a heavily modded SH-AWD Acura TL. Multiple pulls yielded similar results. Custom tuning to come shortly.

Rspec Dyno: MSA Cat Deletes vs stock & 1st Rspec CAI by ABEL Racing! ABEL Racing on Dyno Jet 224. Midwest City, OK MotorSportAuthority cat deletes all stock: 328hp at wheels, 313 torque MSA cat deletes with stock mufflers & 2 stock cats: 342.70 Wheel Horsepower, 320 torque Viagra...

mwituhBM3Kg&feature

For some Reason, we decided to do our 2.0t dyno test on the day of LA's record breaking heat of 112 early 11AM and 2nd dyno for the dual was heat of 115 around 2PM. Outcome was still good. Here it is guys. Scan the paper, NO BS, straight up install and runs. The car is completely stock. You can...

ISR2_sCQ2Es&feature 2011 Hyundai Equus Dyno Test The 2011 Equus' 4.6-liter Tau V8 was plucked intact from the Genesis. This all-aluminum V8 sports 32-valves and dual cam phasing. Whether in the Equus or Genesis, the Tau V8 delivers 385 horsepower at 6500 rpm and 333 lb-ft of torque at 3500 rpm...

We took her over to www.maperformance.com today to get a baseline. Results were pretty typical for a baseline... ~185whp and ~200wtq. This was on a Dyno Jet. We did find a pretty cool way to gain 10-13wtq for free :) In the next few days I will post up how exactly we gained thos 13 extra ft...

After the initial R&D of parts and we were able to receive some of the finished products (Intake pipe & Intercooler pipes) in we were able to get the car back together last Wednesday for our event here. With hosting our Sport Compact last weekend and everything included in putting on an event we...

I want to take a moment and explain how horse power (HP) and torque (Tq) relate to each other and hopefully help people understand what they see on a dyno chart. PART 1 Torque. First off, lets discuss the numbers you get from a chassis dyno. The two numbers everybody wants to see are HP and...

I just sent this member of bkmania an invite to join here. I hope he signs up soon.. It has an aftermarket intake/exhaust system and a bigger snail Garret GT30R. I'm not sure how much boost we're talking about... Dyno video...