plate

Do you live in a state with front plate requirements? Is your bumper already drilled with a big tacky plate mount? Here's what I did to remove it and clean up the nose on my 2015 Gen2 as well as my 2017 G80! Works with 2015-2016 Hyundai Genesis Gen 2 and 2017-20?? Genesis G80**, possibly G90...

I saw discussion regarding this buried in some old threads, and I tackled this 10 min chore this AM. Figured I'd throw up the part and all that since I think we could all use these plugs, thanks to the fact that the front LP bracket is drilled into the flat black trim behind the lower portion...

I had a frame made for my plate on my Genesis 2012. There are only 2 screws on the car and on the frame. I just got a 2015 Genesis and the frame does not sit tight on the bottom where there are no screws - I need some suggestions to hold it down - velcro???? Thanks!

I have a 2012 Genesis Sedan I want LEDs for the license plate lights. Anyone know what type LED bulbs I need to buy?

Hi all, I just leased a 2015 3.8 AWD Genesis sedan. The colors are Ext: Montecito Blue and Int: Beige. I am now interested in getting rid of the dealer license plate frames and getting some nice replacements. On Amazon I see silver/chrome and matte black frames, some with the word Genesis...

The clear plastic plate on the font bumper of my Genesis is cracked. Dealer said probably from a rock while driving. Has anyone else seen this issue? I have less than 5,000 miles and they want me to pay $360 to replace the part.

Hey guys, was in a small accident with the Genesis. Fortunately it wasn't my fault and insurance is covering it. A bonus is that by slipping my buddy who owns the body shop some extra cash he's basically fixing all the scratches dings, dents and painting/clear coating and blending whatever needs...

Hello all, I am the proud new owner of a 2012 CPO Genesis 3.8. The DPO clearly had issues with curbs, and the bottom front bumper skin was hanging to the point that the Hyundai part sticker was visable. :rolleyes: I got under the car and pushed it back up, but I think I still have it wrong...

Alright, here's a strange one for you. I replaced my license plate festoons with Cree 6418 LED's. They looked great. After driving around for a little I saw my cars reflection. The LED strip in the headlight was out. I thought the bulb in the front was blown and was going to take it to Hyundai...

Hi, New to this forum so forgive me if this was already a discussion somewhere else. My question is, there is a plate relocation kit from grimm Speed that i would like to know if anyone that owns a 2015 genesis has had success in using. When i called them they told me that 2014 is the last year...

I love my Genesis and I wanted to make sure the license plate frame (Hyundai part #00402 31923 - License Plate Frame, Chrome) and license plate wasn't going to scratch my new paint. I think I found a pretty solid solution and thought I'd share. Here is the Frame back: There are some small...

How's it going everyone. I was just wondering if anyone knew if and where I could get a tow hook license plate bracket for a 2014 Genny sedan. I specifically asked the dealership to not drill holes in the front bumper, however in NY a front plate is unfortunately required. If anyone knows where...

For those who are looking to purchase a car from another state, here is the list of states that only require one license plate. All others require two plates. If you are getting a car from a state that requires (2) license plates, you might end up with holes in the grill that you do not want...

I got my permanent plates in the mail for the new Genesis yesterday and realized there was no place to put the front plate. I bought it at a dealership pretty far away (but in the same state). I found the bracket for the front plate by the spare tire in the trunk, but there really aren't any...

Hellooooo 2015 Genesis!!! http://www.usatoday.com/story/money/cars/2013/12/10/reviewed-14-mazda6-i-eloop/3590805/

My Genesis coupe keeps losing the plastic under the radiator due to low clearance of curbs and parking lot bumpers. I've heard that there is an Aluminum replacement part available which is more durable, but I've been unable to find where to buy it. Any help will be appreciated as it costs $100+...

For those that don't want to drill unsightly holes in the bumper for the front license plate. GrimmSpeed front license plate relocation kit for the Genesis Coupe would fit the Sedan just fine. I got the kit from here: http://www.partsaccessoriesstore.com/i-495144.aspx No printed installation...

ok i have a 2010 genesis one of the rear maker plate light bulbs is out, how do you change it?tried the 2 phillip screws can't seem to get the light to drop out to change out the bad bulb,do i have to come from the trunk lid?any help is much appreciated.jim

Hi Guys, So far I've gone through two LED sets of lights for my license plate within 7 months and was wondering what the best lights would be? I had to replace them back to the OEM for now. I purchased one set from DiodeDynamics and the other from another website.

Hi R-Spec Enthusiasts, I have a '12 Genesis 5.0 R-Spec and the only thing wrong with it is that I have an old faded license on it which needs to be replaced. I'm leaning towards a personalized plate but something not too "in your face" but something more stealthy (like the car itself) and...