Second Generation 2016 3.8 Ultimate Front LED turn signals

[GizmoNYC]

I've tried the Diode Dynamic's XP80 and the Morimoto's XB both 1157s and they will not power on. If I remove the bulbs I get hyperblink even tho the LEDs will not light up. If I remove them I get the hyperblink. I've tried it with resistors and without and still no difference with the exception of no hyperblink when the resistors are plugged in.

Has anyone else tried to swap out the bulbs with LEDs yet?

I called Diode Dynanics and they said that they haven't heard of that issue.

 

[Kp117]

I've tried the Diode Dynamic's XP80 and the Morimoto's XB both 1157s and they will not power on. If I remove the bulbs I get hyperblink even tho the LEDs will not light up. If I remove them I get the hyperblink. I've tried it with resistors and without and still no difference with the exception of no hyperblink when the resistors are plugged in.

Has anyone else tried to swap out the bulbs with LEDs yet?

I called Diode Dynanics and they said that they haven't heard of that issue.

I dont quite understand what you are trying to say by "If I remove the bulbs I get hyperblink. I am going to install the VLED ones soon. I'll let you know if it works.

 

[GizmoNYC]

Meaning that if I remove the LED or regular bulbs the turn signals blink fast but with either bulbs installed the oem bulbs blink normal but the LEDs do not work but no hyperblink

 

[StarPower]

The sockets may be wired backwards. Check the link below for more information (starting at post #23):

https://genesisowners.com/hyundai-genesis-forum/showthread.php?t=13974&page=3

 

[GizmoNYC]

Ah! I'll give it a try this week. Hopefully is the same issue.

 

[jepank]

You guys dont get LED DRL in US ?

 

[GizmoNYC]

Yes but the turn signal bulbs are incandescent.