Adding an amp and sub box to 2015 Sedan 3.8 w/ 14 Spkr Lexicon

[wchavisiii]

I’ve checked here in the forum and found where the guy provides a diagram and says pins 13 and 26 are for sub 1 and use those.

My connector 1 (white connector), the only has 22 pins and a pos and neg pin. The gray less wires/pins.

Can anyone give me guidance on what wires to tap off to provide to my LOC?

 

[DV_hat]

I’ve checked here in the forum and found where the guy provides a diagram and says pins 13 and 26 are for sub 1 and use those.

My connector 1 (white connector), the only has 22 pins and a pos and neg pin. The gray less wires/pins.

Can anyone give me guidance on what wires to tap off to provide to my LOC?View attachment 30400

Not sure if you've found the answer but I used the grey connector. As the are in the photo, you want the pair in the 2nd row from the top.

 

[wchavisiii]

Not sure if you've found the answer but I used the grey connector. As the are in the photo, you want the pair in the 2nd row from the top.

Hello yes I figured it out. Thanks for the reply!

 

[kevvyg]

Not sure if you've found the answer but I used the grey connector. As the are in the photo, you want the pair in the 2nd row from the top.

These?

 

[GuillermoB26]

Not sure if you've found the answer but I used the grey connector. As the are in the photo, you want the pair in the 2nd row from the top.

What you connect the loc to ? What color wire ? I have a setup but I’m pulling voices from the subs

 

[GuillermoB26]

I’ve checked here in the forum and found where the guy provides a diagram and says pins 13 and 26 are for sub 1 and use those.

My connector 1 (white connector), the only has 22 pins and a pos and neg pin. The gray less wires/pins.

Can anyone give me guidance on what wires to tap off to provide to my LOC?View attachment 30400

What pair ??? Helpppp

 

[GuillermoB26]

I’ve checked here in the forum and found where the guy provides a diagram and says pins 13 and 26 are for sub 1 and use those.

My connector 1 (white connector), the only has 22 pins and a pos and neg pin. The gray less wires/pins.

Can anyone give me guidance on what wires to tap off to provide to my LOC?View attachment 30400

What you tap into ???

 

[GuillermoB26]

I’ve checked here in the forum and found where the guy provides a diagram and says pins 13 and 26 are for sub 1 and use those.

My connector 1 (white connector), the only has 22 pins and a pos and neg pin. The gray less wires/pins.

Can anyone give me guidance on what wires to tap off to provide to my LOC?View attachment 30400

What wires you tap ? Color ?