Anyone know the size of the lugs on our 11' Gen?

[Jerryss]

I was trying to find a "Spinner" jack, in lieu of the factory one, to make wheel removal a bit faster. My "spinner jack" doesn't fit. Am I out of luck, or is there one that fits?

Thanks!

 

[Mark_888]

Excuse my ignorance, but what is a spinner jack? Google search did not turn up anything.

 

[Jerryss]

oops - sorry! I should have said automotive 4-way lug wrench.

 

[Mark_888]

Looks like they come in SAE and metric sizes. I would guess that Hyundai uses metric (but I don't know for sure):
http://www.awdirect.com/standard-welded-metric-lug-wrench-2hlb1/shop-tools/

 

[Jerryss]

Hmmm.. that's a good point, Mark. That actually didn't occur to me to look for a metric one. See why this board is so great?

 

[amartz]

My tire iron has three non-metric and one metric size on it. The metric socket works with my 2012 3.8.

 

[NSXNEXT]

21mm

 

[xiaphin]

21mm

What he said. 21mm socket. M12x1.5 thread.

 

[Jerryss]

Thanks, guys -

a 21mm socket and a breaker bar and I swapped out the summer 19's for the Winter 17's this weekend.

 

[NSXNEXT]

Thanks, guys -

a 21mm socket and a breaker bar and I swapped out the summer 19's for the Winter 17's this weekend.

Hey I'm in Bucks County too. Luckily I have a beater for Winter.

______________________________

Help support this site so it can continue supporting you!

 

[amartz]

Screw the snow tires, if it's that bad, I get my Jeep Wrangler out!!