Greg6M/T
Registered Member
- Joined
- Mar 24, 2020
- Messages
- 58
- Reaction score
- 76
- Points
- 18
- Location
- SF Bay Area, CA
- Genesis Model Type
- Genesis G70
For sale is my JB4 which I've been using on my Genesis G70 2.0T. It was purchased in June 2020 and is in excellent condition and perfect working order. I've had it under the hood for about 6,000 miles of driving. I'm getting rid of it because with the 91 octane gas available in California, I was only able to run Map 1. At Map 1, there isn't enough noticeable power difference to justify the inconvenience of removing the JB4 for dealer visits. I've been driving the car stock for a few months now and the power is fine for my needs.
According to the BMS website, this JB4 will work with any Kia/Hyundai/Genesis 3.3L, 2.0L, and 1.6L turbo engine. The installation guide can be viewed and downloaded from the Burger Motorsports website. Included is everything you need to get the JB4 installed and running. The JB4's wiring harness includes the proper connectors to hook up with the MAP and TMAP sensors under the hood. The OBD2 cable connects to the diagnostics port inside the vehicle, while the BMS data cable connects to your laptop's USB port for changing maps, logging data, and updating software. The thin black wires are for optional fuel control and they attach to the O2 sensor wires with posi-taps (included).
The price is $400 which includes UPS ground shipping to the lower 48 states. I can accept payment with Venmo or Zelle.
According to the BMS website, this JB4 will work with any Kia/Hyundai/Genesis 3.3L, 2.0L, and 1.6L turbo engine. The installation guide can be viewed and downloaded from the Burger Motorsports website. Included is everything you need to get the JB4 installed and running. The JB4's wiring harness includes the proper connectors to hook up with the MAP and TMAP sensors under the hood. The OBD2 cable connects to the diagnostics port inside the vehicle, while the BMS data cable connects to your laptop's USB port for changing maps, logging data, and updating software. The thin black wires are for optional fuel control and they attach to the O2 sensor wires with posi-taps (included).
The price is $400 which includes UPS ground shipping to the lower 48 states. I can accept payment with Venmo or Zelle.
