P0018 Code - Crankshaft Position Camshaft Position Correlation

[ckrealestate]

my car is shaking like crazy and the mechanic said the code is p0018 bank2 sensor A, also cylinders 2,4,6 are misfiring. Any idea what this could be? The mechanic spent a long time working on it with no luck. I would really appreciate your insight folks!

 

[svo375]

I had the same code, replaced the cam sensors, one and two. Two is drivers side back of block, easy and cheap to fix. Turns out the problem was with the oil control solenoid, for vvt bank 2. You can do voltage, resistance test to see if it's the issue, not hard, just pita to get to. I replaced both. If one fails, probably other is going to go and didn't want to go threw the hastle again. It's also a pita to get to bank 2 solenoid, one is pretty easy.

 

[MrXperc]

Same here, had to replace CMP's on bank 2 in the back and also changed both intake OCV's which are kinda hard to get to since you have to take off the upper intake manifold and intake manifold to reach the OCV's . If you have the lambda engine (3.8L Genesis) here is a handy pdf for reference. Check page 11 for location diagram. https://cargeek.live/docs/hyundai_Lambda_Engine_Guide_Centennial_Equus.pdf