TheRealAliA
New member
- 11
- 4
- 3
- Genesis Model Year
- 2022
- Genesis Model Type
- Genesis G70
Hey y’all.
I’m pretty new to the forum and have a ‘22 G70 RWD 3.3T. I’m looking to fit wider tires and wheels to get a more aggressive look and help with traction since I got tons of spin with the JB4. The only issue is I have no idea what aspect ratio or offset to get. It’s something I haven’t been able to figure out, even with videos and sites like willtheyfit. I saw a forum member with these wheels and tires:
@Miltonguerrero93
With coilovers
Vossens vfs2
Front: 20x9 +32 with 20mm spacer
245/35/20 nitto nt555 g2
Rear: 20x10.5 +45
305/30/20 nitto nt555 g2
(Slight rub on bumps and dips)
The difference between his setup and my desired setup is that I’m trying to keep the 19” wheel size instead of his 20s, and I’ll like 19x9.5 wheels in the front to fit 255 width tires up there with no spacer. I also don’t intend on getting coil overs. So ideally this is what my setup would be (words mean values I don’t know):
Front: 19x9.5 +OffsetFront
255/AspectFront/19
Rear: 19x10.5 +OffsetRear
305/AspectRear/19
If anyone could help me with this it’d be greatly appreciated!
I’m pretty new to the forum and have a ‘22 G70 RWD 3.3T. I’m looking to fit wider tires and wheels to get a more aggressive look and help with traction since I got tons of spin with the JB4. The only issue is I have no idea what aspect ratio or offset to get. It’s something I haven’t been able to figure out, even with videos and sites like willtheyfit. I saw a forum member with these wheels and tires:
@Miltonguerrero93
With coilovers
Vossens vfs2
Front: 20x9 +32 with 20mm spacer
245/35/20 nitto nt555 g2
Rear: 20x10.5 +45
305/30/20 nitto nt555 g2
(Slight rub on bumps and dips)
The difference between his setup and my desired setup is that I’m trying to keep the 19” wheel size instead of his 20s, and I’ll like 19x9.5 wheels in the front to fit 255 width tires up there with no spacer. I also don’t intend on getting coil overs. So ideally this is what my setup would be (words mean values I don’t know):
Front: 19x9.5 +OffsetFront
255/AspectFront/19
Rear: 19x10.5 +OffsetRear
305/AspectRear/19
If anyone could help me with this it’d be greatly appreciated!
Last edited: