Front license plate mounting

[hrmneyezin]

You can use any plastic bracket @hrmneyezin. I used this BACK PLATE for my car. This bracket goes on the tow hook but i didnt like it there so i mount it on the lower grill. I only used the the plate
I put some soft tape on the back side of the back plate to avoid strach on the bumper. Then mount the back plate with strong zip ties to the lower grill. I add the plate frame and screws. Also used the screw caps to hide bolts. Everything in black color look great.

license-plate-frame-black

Screw Caps

screws

ok thanks a lot. i will try it out. do you mind sharing your gmail so i can ask any questions about the install?

 

[Kraig Wilkinson]

ok thanks a lot. i will try it out. do you mind sharing your gmail so i can ask any questions about the install?

There is really no way to get around it, these cars dont like front plates.

 

[BHANGU_G70]

ok thanks a lot. i will try it out. do you mind sharing your gmail so i can ask any questions about the install?

 

[TinsleyC]

TinsleyC. The link takes me to
1995-2000 Chevrolet Tahoe License Plate

Ther forum inserted that hyperlink, I didn't.

"I hate it when it does that".

 

[TinsleyC]

Does this not fit the G70?

Genuine OEM Hyundai - License Bracket Part# 86920-B1000 | Hyundai Parts OEM

 

[Toddasaurus]

Does this not fit the G70?

Genuine OEM Hyundai - License Bracket Part# 86920-B1000 | Hyundai Parts OEM

Sure does! And look at that price! Haha

 

[gnsallman]

I have my front plate mounted on the tow hook. I initially bought this mount from Cravenspeed but it didn't fit at all. It was way too far to the left and was hitting the bumper. I emailed them and they essentially shipped me the 2020 Kia Soul one (I know, it's odd) but this one fits much better. They also sent an extension arm so I could mount it more to the left. My G70 has the sensors in the front so this mount doesn't interfere with those anymore. They also sent a shorter tow hook bolt so the plate doesn't stick out as much with the larger bolt. It took some back and forth with emailing them but they were more than happy to make it work. The build quality on this mount is very good too. It's solid.

 

[TinsleyC]

That beats the heck out of drilling holes...

My OCD just has to have them centered. My brain goes funny on an off-centered plate.

Seems like Genesis would offer a mount that clamps through the grill work.

I'd love to have this arrangement. Cop pulls me over for no plate, I press the button and say "it must have been a different car, office - I have a plate, can you check again?"

 

[Kraig Wilkinson]

T

That beats the heck out of drilling holes...

My OCD just has to have them centered. My brain goes funny on an off-centered plate.

Seems like Genesis would offer a mount that clamps through the grill work.

I'd love to have this arrangement. Cop pulls me over for no plate, I press the button and say "it must have been a different car, office - I have a plate, can you check again?"

That's Awesome. How much do you think something like that costs?

 

[TinsleyC]

I don't think I ever looked for a cost, but if I find one I'll let ya know. Just too tired to search for it right now... long day!

______________________________

Help support this site so it can continue supporting you!

 

[CPray#2019]

This is how I’ve mounted my front license bracket

 

[brianong18]

Not sure why my license plate mount wasn't installed at the dealer since we require front plates in MD. They just leave the mount in the trunk. I don't mind though. I'm going to let it roll for now til I get pulled over.

 

[videopho]

This is how I’ve mounted my front license bracketView attachment 29929

Everything else looks OK except the Eagle logo.

 

[carljr101]

Everything else looks OK except the Eagle logo.

That’s the best part of the car LOL

 

[ralpheads]

I have a 2021 G80. It looks like with the bracket they supply, you must drill through the plastic behind the grill. Is that right? There seem to be a few dots that may be the marks for where to drill.

 

[TwinTurbo]

I'm looking at this:

License Plate Relocation Kit - Hyundai Genesis Coupe

License plates are a necessary evil on the front of our cars, but you can save your front bumper from looking boring or blocking flow to your FMIC with the GrimmSpeed License Plate Relocation Kit.

www.grimmspeed.com

 

[21GenesisG70]

I'm looking at this:

License Plate Relocation Kit - Hyundai Genesis Coupe

License plates are a necessary evil on the front of our cars, but you can save your front bumper from looking boring or blocking flow to your FMIC with the GrimmSpeed License Plate Relocation Kit.

www.grimmspeed.com

Don’t, it looks like the EOS plate which has some plastic brackets so it’s cheaply made, I sent mine back and got the RHO plate instead. It’s the best one on the market and has infinite mounting positions.

I also sent back the cravenspeed one because it was interfering with the front sensor and could only be mounted one way and it stuck out way too far as someone mentioned.

It’s a little pricey, but I’m very happy with the quality.

Genesis G70 2018-2021 rho-plate V2

rho-plate V2 tow hook license plate relocator for Genesis G70 2018-2021

www.rho-plate.com

 

[TwinTurbo]

Don’t, it looks like the EOS plate which has some plastic brackets so it’s cheaply made, I sent mine back and got the RHO plate instead. It’s the best one on the market and has infinite mounting positions.

I also sent back the cravenspeed one because it was interfering with the front sensor and could only be mounted one way and it stuck out way too far as someone mentioned.

It’s a little pricey, but I’m very happy with the quality.

Genesis G70 2018-2021 rho-plate V2

rho-plate V2 tow hook license plate relocator for Genesis G70 2018-2021

www.rho-plate.com

Thank you for the feedback---I'll definitely check it out.

 

[21GenesisG70]

Welcome. It’s raining out otherwise I’d take a pic for you.

Below is a pretty good product shot I found. Take a look at all those holes, you can position it anyway you want. I positioned mine nice and low so it covers the least amount of the grille without interfering with the sensors. Plus it has an articulating swivel. All metal parts.

 

[TwinTurbo]

Welcome. It’s raining out otherwise I’d take a pic for you.

Below is a pretty good product shot I found. Take a look at all those holes, you can position it anyway you want basically. positioned mine nice and low so it covers the least amount of the grille without interfering with the sensors.

Looks solid....all I need now is a sale!!