• Car enthusiast? Join us on Cars Connected! iOS | Android | Desktop
  • Hint: Use a descriptive title for your new message
    If you're looking for help and want to draw people in who can assist you, use a descriptive subject title when posting your message. In other words, "I need help with my car" could be about anything and can easily be overlooked by people who can help. However, "I need help with my transmission" will draw interest from people who can help with a transmission specific issue. Be as descriptive as you can. Please also post in the appropriate forum. The "Lounge" is for introducing yourself. If you need help with your G70, please post in the G70 section - and so on... This message can be closed by clicking the X in the top right corner.

Pulley name ????

MADDMOE

Registered Member
Joined
Nov 30, 2008
Messages
474
Reaction score
34
Points
28
Location
NY NY
Genesis Model Type
1G Genesis Sedan (2009-2014)
Ok so i have a whining noise coming from a pulley, i think its about time i change my belt ( which i never did) but knowing the name of these pulleys will help me locate them in the service manual or part #........ thanks
 

Attachments

  • IMG_20210621_074515~3.webp
    IMG_20210621_074515~3.webp
    121.8 KB · Views: 11
The lower center one is the crankshaft damper pulley. The one to the right in the illustration (left on the car) is the air conditioner compressor pulley.

Please note that changing the damper pulley requires some knowledge of what you are doing. You can ruin the timing chains by turning the crank the wrong way, and you have to replace the front seal.
 
Sounds like i might be just changing the belt.....
 
You can ruin the timing chains by turning the crank the wrong way, and you have to replace the front seal.
I am not following you. How is this possible? The crank is still connected to the the cams with the pulley removed via the timing chain. The removal of the pulley has nothing to do with the timing/chains on the engine.
 
Op I bet the whining noise if from the tensioner pulley.
 
I am not following you. How is this possible? The crank is still connected to the the cams with the pulley removed via the timing chain. The removal of the pulley has nothing to do with the timing/chains on the engine.
The timing chains tend to follow interesting paths over guides and tensioners. If the crank is turned backwards, they can get stuck on the guides and break or jump off.

1624476155420.webp
 
Looking to update and upgrade your Genesis luxury sport automobile? Look no further than right here in our own forum store - where orders are shipped immediately!
The timing chains tend to follow interesting paths over guides and tensioners. If the crank is turned backwards, they can get stuck on the guides and break or jump off.

View attachment 37326
Thanks for the explanation. I still don't see how that is possible. Take care.
 
Back
Top