diy

I decided to install both a front and rear dash cam on our 2024 Genesis GV60. The camera comes with a replacement (OEM-like) housing for the rear-view mirror with an embedded camera and a long cord to connect a rear dash camera. I couldn't find any information online on how to install with the...

Hey there, A couple of hours into a long road trip, my mom's 2011 Cabernet Red Pearl sedan (non-nav, base audio) suffered an audio failure. According to her, the radio was playing MP3s from a USB stick when it suddenly cut to static. The radio played loud static over the sounds of whatever...

Hello guys! I'm new to the forum and this is my first post! I plan on learning more and more as I go and spreading info when I can. I have a question though. I'm not a mechanic by any means, but I am a DIYer and a car enthusiast. So, anybody can chime in if they know what hose this is as I am...

Hey guys. So, I took my kids through the automatic car wash today (they love it!) in my '09 4.6 Genesis. As we entered onto the conveyor, I immediately start responding to work emails ,via iPad, that needed responding to. Neigh did I realize, until it was too late, that I had left my automatic...

I have a 2010 Genesis Sedan which is having the heated seats issue. From what I read I have to put a coil around a tube in the seats to fix this. Basically the drivers side heated seats turns on then about 20 seconds later it turns off and is unresponsive to turning back on unless i power...

Hi guys, Over the weekend I did a complete transmission flush, filter refresh, transmission pan\magnet cleaning, and transmission fluid change. To top it off, I also added a oil cooler to the radiator to assist in cooling the transmission fluid since I push my car pretty hard. Anyway to get...

Hello All- I have seen the OEM DRL's on EBAY for sale including the wire harness- are there any other members that have installed them per chance? If so I haven't seen any post or DIY guides. Thanks for any suggestions- Scoob

I'm not sure if this thread belongs here or exists somewhere else. Does anyone know the torque specifications for the oil drain bolt and oil filter cap on the 2015 3.8 L V6? The specs don’t seem to pop up online and I’m not anxious to spend $20 to join HyundaiTechInfo.

If you are considering a DIY HID install on a Genesis Sedan (2012 for me), allow me to possibly save you some serious grief. I have read bulb install stories here that have ranged from “too loose, spinning in the socket” to “broken tabs when turning to lock” and mine was potentially the latter...

Recently, after going to my local car wash. I noticed that the workers were very rough in cleaning the navigation screen. They left light but noticeable scratches on my nav screen. I got to thinking of what would my screen look like in a few years? So to further protect and maintain long...

Does anybody have a DIY or some tips on removing the center console? I'm determined to fix these annoying creaks/rattles that have been getting louder and louder in the past few months. Thanks in advance!

I am very excited about this solution that I devised since I think the omission of OEM supported BT streaming on Tech cars is ridiculous. I had seen other posts about solutions that involved using the 12v plug, but this was not satisfactory since it would look bootleg and occupy that 12v outlet...

Oil Filter Comparison Purolator L25848-57 pleats Mahle OX 351 D-54 Pleats There has been a lot of conversation as to what type of filter replacement should be used (OEM vs. aftermarket). Certain forum aficionados are hardcore OEM while I’ve read aftermarkets are of high quality. I change the...

TCM is in constant communication with the control system's components (sensors and solenoids). If an abnormal signal is received for longer than the predefined duration, TCM recognizes a fault, stores the fault code in memory, and then sends out a fault signal through the self-diagnosis...

Removal procedure for the rear seat.

Originally I created this mod for the Sonata, and because of popular demand I've created it for a few more cars including the Genesis Coupe! This mod was created for function as well as style. It allows you to see your cup holders at night and looks really cool in the process! The lights match...

Here is a little DIY guide to replacing a rear anti-sway bar on a Hyundai Genesis Sedan. I really think that this is a project that most semi-handy people can accomplish. It wasn't very hard. Note - The 2012 Genesis Sedan uses the same sway bars in all of their models i.e. V6, 4.6, 5.0, 5.0...

Hey Everyone, Here is a quick DIY on how to install a TWM Performance Universal Shift Knob. They use a threaded insert application design which is a bit different than the conventional thread on thread off, one application shift knob so I figured I’d post up a little DIY off of their website...

You will note that the drain plug is very, very tight. I suspect the factory uses an impact wrench to tighten this plug. Whatever, it will take some tapping with a hammer on the wrench to break it loose. Don't use an impact wrench as it will spin off so fast that you will be bathed in oil...

Finally, I finished my LED project. it's rock!! http://genesisowners.com/hyundai-genesis-forum/showthread.php?t=6348&page=2 from this thread,I tried to do but I changed my mind, so I ordered similar LED but different shape. I ordered this led, here is my testing YouTube -...