removing

Any procedures out there to remove the shark fin for painting? I am considering a gloss black vinyl roof wrap but the white antenna looks silly. Thanks

Genny family Yesterday I made a small mistake as I was removing my old window tint to apply new by not changing my blade in my olfa knife. I accidentally scratched my driver's rear window (scratches I should say). They are fine scratches and they are not deep. I was told by a glass shop you...

Just about to take delivery of new 2015 Genesis and dealer is insisting that "all cars go out with our dealer badge" on rear. While this is only a small circle emblem, i really prefer a cleaner look. Dealer is already going to swap rear H to winged badge as part of original deal. How hard...

Is there anyone out there that has replaced the festoon bulbs in the map lights and courtesy light on the headliner of an 2014 sedan. I cant figure out how to get the trim rings off to get at the bulbs. Any help would be apprectiated

Hey - Jason and I are trying to do this swap (black trim for chrome trim) and as I took the trim off, I made a little video showing how easy it is. I had a little plastic "squeegee" thing I used to rub down vinyl, which worked great to pry up the corner. See how easy this is. This will end...

I didn't realize till it was too late, but I much prefer the Genesis without a front license plate. Unfortunately the dealer put a front plate on without giving the option, when I would have preferred not. Question: does anyone know how likely it would be that I'd get pulled over for no...

Anyone do this before? Am thinking it will make my genesis look lower and better.. Just put on some Roderick Rw3 19" staggered wheels.. If anyone has done this woul love to see some pics.. Especially if you have a black genesis.. Thnks!

For those of us who are looking always for more power, better gas mileage and don't mind a tiny bit more intake noise at open throttle, consider removing the MAF screen. This is an old trick that I first learned about dealing with GM's LS motors. GM owners often remove the screen picking up...

I opted out but it keeps coing back.is there a way to stop this? I use am I pad mostly not sure if that has anything to do with it.

There were several threads on the 4.6 removing the air flap located inside the main air box. The flap is held shut by a magnet. Intake vacuum overcomes the magnet and opens the flap. Removing the flap adds a tad to intake noise, but otherwise it allows the motor to breath better. You...

Going to remove the drivers seat to machine a few brackets that will lower it. Any info on the proper way the disconnect the "Air Bag" connectors. Processes & Procedures. Thanks

Many motors today, including Hyundai, have a mesh screen in front of the mass air flow sensor (immediately downstream from the airbox). The purpose of this screen is twofold: primarily to smooth airflow turbulence, which exists at low speeds, so as to generate a more consistent signal to the...

Can anyone tell me how to get to the position lights? I removed the cap that covers the back of the light but I have had no luck getting the position light out with needle nose pliers. I even tried to pull out the whole head light by removing three bolts but the head light wouldn't come out. I...

I would like to route a sirius antenna cable into the storage area of the center console, but have not been able to remove the shifter knob (an consequently the console itself). Per Hyundai's technical site, it appears that the knob is just pressed onto the shifter lever, but if so, it's really...

I removed my MAF (mass airflow) screen 5000 miles ago, and can report no issues whatsoever. It is hard to definitively determine power and mileage increases, but I can report no mileage decreases. The MAF screen resides at the mouth of the plastic air filter cover. Unlike GM products which are...

Thats Right! 30 Min. TOPS for anyone who has a tid bit of common sense! For me...22 min!! The wife was at work for the weekend and I was in charge of our 5 month old. So...it had to be quick. Luckily enough, she was content in her bouncer! YES...I had a monitor!:o 1.) Open Hood (If you...

I know it's here somewhere but i have lost it. ANYONE try and remove the Lazy H ? I was thinking about cutting it off with a shart exacto knife so the new stick on would recess in and look more OEM. Buying a new Air Bag module is out of the Question for me.

Is there any trick to this or does the heat-and-peel method work? I have no issue with the dealer, but it kinda ruins the look in my book ...

I just picked up my V6 w/ Tech last night and didn't notice it last night but the black on black has a pinstripe down the side with a flying H near the rearview mirror. I didn't notice this on any other colors. Did the dealer add this? How do I remove it?