2011 Genesis Sedan 3.8L All Weather mats and trunk emblem

[saintsrow]

Hello All,
I just recently purchased a CPO 2011 Genesis Sedan 3.8L. So far I like it a lot. I am planning to get all weather mats (OEM) and read many old posts for the information. Can anyone confirm if the below mats on Amazon fit my vehicle?

Front Mats: Model U8130-3M101
[ame="http://www.amazon.com/dp/B008KZK4U8/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=35O1GGYYCQINF&coliid=I1GI10ERH4YTCK"]Amazon.com: Genuine Hyundai Accessories U8130-3M101 Black All Weather Floor Mat for Hyundai Genesis: Automotive[/ame]

Rear Mats: Model U8130-3M600

[ame="http://www.amazon.com/Genuine-Hyundai-Accessories-U8130-3M600-Weather/dp/B008KZK5KC/ref=sr_1_1?ie=UTF8&qid=1393023188&sr=8-1&keywords=U8130-3M600"]Genuine Hyundai Accessories U8130-3M600 Black Rear All Weather Floor Mat for Hyundai Genesis : Amazon.com : Automotive[/ame]
Also, I am planning to replace the 'H' logo on the trunk myself with the wing emblem sold on Amazon. Can anyone provide a review on these items if they purchased these items from Amazon? My Genny is white in color. So, is there any color option for the trunk emblem to match?

Wing Emblem: ASIN - B007Z1FSKO
[ame="http://www.amazon.com/dp/B007Z1FSKO/ref=wl_it_dp_o_pd_nS_ttl?_encoding=UTF8&colid=35O1GGYYCQINF&coliid=I3IGD40IUE1UH"]Genesis Sedan Wing Trunk Emblem : Amazon.com : Automotive[/ame]

Thanks a lot in advance.

 

[ShadowZ]

If they are true genuine OEM then they will fit.

as far as the wing emblems go, I have only seen the normal chrome or black chrome options.
I got mine from kdmland on EBay and got the hood and wheel covers too. you can get each piece individually if you want. free shipping and fair price.

 

[saintsrow]

Thank you ShadowZ for your kind reply. I did buy both trunk and hood wing emblems from KDMland on ebay for $20 together. I have to install them on my Genny. What is the best and simple alternative for using a dremel tool for hood emblem? I can't afford to buy a new tool for this purpose. For the trunck, i think it is relatively easy IMAO but time taking.
Also, can anyone provide your views/reviews on the before mentioned all weather mats from Amazon for my 2011 3.8 V6 sedan? The model numbers match with what Hyundai online store has.
Thank you again.

 

[PMCErnie]

Just chip away with a sharp box cutter. Or, leave the hood emblem off like many/most of us do. Personally, I love that debadged front end look.

 

[ShadowZ]

I do not have the OEM mats, but I have had ones very much like it in my last couple cars. I like them, they are thick. What I like more in my Genny are the WeatherTech floor liners.

They are not as thick, but they cover the sides of the carpet and not just the floor. They are laser cut and fit perfectly. It will keep the sides from getting wet and dirty.

My OEM mats would eventually wear through where my right heal sits, by that I mean it will have a split, not a gaping hole. But it is enough to let water through. I'm sure the Weather Tech floor liners will eventually wear out in that spot too.

As far as the emblems go, I did mine yesterday. It was -16F where I live and i got the "H" off with just a hair dryer, plastic putty knife and Permatex penetrating oil. It took me 10 minutes to get everything off and cleaned and then 2 minutes to install the badge.

The front badge I did with a dremmel. If you are going to use a box cutter please wear safety glasses at a minimum. I wore them for the dremmel but may not have needed to, but with a box cutter you'd better. those tips snap off easily and if you catch that in your eye you will be sorry. I personally would not do it that way, the plastic is thick and I would put money on you losing feeling in your thumb or fingers permanently because you slip, slice through a nerve and spray blood all over your carpet and walls.

I have personally seen someone do that.