Adding bass to your 17 speaker Lexicon with new amplifier

[one4house]

OK. Here we go. 2018 G90 Ultimate, and I decided to piece together things for my car. I am one of the cursed individuals with an amp that has two 28 pin connectors to the amp. One Blue and one Red. I was finally able to track down the correct pinout for this version at my local car audio shop.

The wires you tap for the sub output are the RED for + (PIN 2) and the BLUE for - (PIN 17) Both of these wires are in the red connector.

For the REMOTE wire, to turn on your amp, you are going to use the very small PINK wire (PIN 8) from the blue connector. Please see the wiring digram and wire tap pictures attached

 

[Ecoleman]

View attachment 29941

Got the diagram from one of the members here. Make sure you are working with correct connectors.

For me I had to use pin 13 connector B as my acc power none of the wire colors are the same for me I have a 2017 g80 ultimate with the 17 speaker is there any other way to get the bass +,- signal wires then from the connectors?