Hi All. My wife is the owner of a 2012 Genesis sedan with the standard factory audio system (not Lexicon). I've recently installed a complete system, minus the head unit. Alpine Type R all around...speakers and subs. Last weekend I built a 4th order dual 12" enclosure that fires through the stock subwoofer hole (pictures attached). It all sounds pretty good, but something is "missing".
I've been installing systems (as a hobby) for nearly 20 years and I'm pretty confident that the factory head unit signal is the limiting factor. Has anyone successfully installed a single DIN aftermarket head unit in these cars? Basically I need at least 2 sets of RCA preouts, preferably at 4v or higher. Any links or suggestions would be much appreciated.
The design:
Dry fitting.
Installed, shown without beauty panel, which is simply a carpeted board to cover the raw wood.
Front view that shows the port, through the rear deck:
I've been installing systems (as a hobby) for nearly 20 years and I'm pretty confident that the factory head unit signal is the limiting factor. Has anyone successfully installed a single DIN aftermarket head unit in these cars? Basically I need at least 2 sets of RCA preouts, preferably at 4v or higher. Any links or suggestions would be much appreciated.
The design:
Dry fitting.
Installed, shown without beauty panel, which is simply a carpeted board to cover the raw wood.
Front view that shows the port, through the rear deck:
Attachments
Last edited:
