• Car enthusiast? Join us on Cars Connected! iOS | Android | Desktop
  • Hint: Use a descriptive title for your new message
    If you're looking for help and want to draw people in who can assist you, use a descriptive subject title when posting your message. In other words, "I need help with my car" could be about anything and can easily be overlooked by people who can help. However, "I need help with my transmission" will draw interest from people who can help with a transmission specific issue. Be as descriptive as you can. Please also post in the appropriate forum. The "Lounge" is for introducing yourself. If you need help with your G70, please post in the G70 section - and so on... This message can be closed by clicking the X in the top right corner.

Camshaft Desired VS actual (Bank 1&2 ex_in) help needed - 4.6 tau

pchelka

New member
Joined
Mar 1, 2020
Messages
14
Reaction score
0
Points
1
Genesis Model Type
1G Genesis Coupe (2009-2016)
Hello Guys

I need some information - I'm struggling with 2009 4.6 Tau motor vibrations,
Can I ask any one to tell me following values for |idle rpm - warm engine|:
  • Intake Bank 1 Desired
  • Intake Bank 1 Actual

  • Intake Bank 2 Desired
  • Intake Bank 2 Actual

  • Exhaust Bank1 Desired
  • Exhaust Bank1 Actual

  • Exhaust Bank2 Desired
  • Exhaust Bank2 Actual
In my car I'm seeing
  • Bank 2 Exhaust is desired -18 | actual -20
  • Bank 1 Intake is desired 30 | actual 27

Oviously first thought is - your timing is wrong maybe it jumped. But I did chcek the timing chians (i replaced all of timing components not so long ago) And they do look ok, markings are just fine. No erro codes for cams out of sync either, so i wonder if they can have some discrepancies or should be spot on?
 
Looking to update and upgrade your Genesis luxury sport automobile? Look no further than right here in our own forum store - where orders are shipped immediately!
Back
Top