Rey
Registered Member
Check engine light on my '14 Equus (same basic drivetrain and electronics). My ScanGuage showed a "PO441" error code. Checking internet saw it might be a loose gas cap or was otherwise related to the gas vapor recirculation system. This system collects excess gas vapor in the fuel tank and reroutes it to motor intake to be burned. It is a complicated expensive system, which is largely controlled by a "gas recirculation valve. This electrically controlled valve is located on the front top of the intake manifold. It costs about $40.
My ScanGuage would not clear the code, meaning that it could not access this part of the car's computer or that the condition was persistent and needed more attention. Did not try the free AutoZone code reader. Went directly to the dealer. They fooled and fooled with it, worrying about whether or not the line feeding the valve had a hidden pinch or was broken. They let me talk to the tech. Seems dealer's computer easily reset the code and it did not reappear. This should have ended the query. I asked if they had checked out the gas recirculation valve (simple vacuum test). They had not. Valve checked out just fine. Concluded it was a one-time failure of the valve to open or close. Buttoned up the car and went home - cost at $125 for the "diagnosis".
My point is that whenever a check engine light illuminates do check it with a code reader. If you can clear the code and it does not light up again you do not have a problem. It was just a one-time "event". If the check engine light cannot be extinguished then go to the dealer and try to reset using its computer. Obviously, if the code reappears you have a problem, which the dealer may be able to address.
My ScanGuage would not clear the code, meaning that it could not access this part of the car's computer or that the condition was persistent and needed more attention. Did not try the free AutoZone code reader. Went directly to the dealer. They fooled and fooled with it, worrying about whether or not the line feeding the valve had a hidden pinch or was broken. They let me talk to the tech. Seems dealer's computer easily reset the code and it did not reappear. This should have ended the query. I asked if they had checked out the gas recirculation valve (simple vacuum test). They had not. Valve checked out just fine. Concluded it was a one-time failure of the valve to open or close. Buttoned up the car and went home - cost at $125 for the "diagnosis".
My point is that whenever a check engine light illuminates do check it with a code reader. If you can clear the code and it does not light up again you do not have a problem. It was just a one-time "event". If the check engine light cannot be extinguished then go to the dealer and try to reset using its computer. Obviously, if the code reappears you have a problem, which the dealer may be able to address.