WheelerGuy
Registered Member
- Joined
- Jul 6, 2010
- Messages
- 11
- Reaction score
- 0
- Points
- 0
I posted this question under "Electrical, Lighting... , etc." and received a couple of helpful responses, like contacting hyundai Customer service or disconnecting the wire to the tilt/telescoping steering control motor. I thought maybe I would post the question again in the General forum to see if there are any other suggestions, or more details like where to locate the tilt steering motor and which wire to disconnect. I have tried contacting Hyundai Customer Service, but they have not responded.
Here's my question:
I'm in a wheelchair and I need to install hand controls that operate the brakes and accelerator pedals in my newly purchased 2010 Hyundai Genesis V-6 Sedan. It has the Premium Nav package which means that it has the electronic Tilting-Telescoping Steering Column, integrated with the 2 Memory Seat functions for the Driver's seat.
The company that makes the hand controls says that in order for their hand controls to work, they have to disable the electronic Tilting-Telescoping Steering column. I can live with that part. However, they state that since the steering column is integrated with the memory seats, that the memory seats have to be disabled also.
Is there anyone out there who knows (or who can point me in the right direction of somebody who might know), how to isolate and disable the electronic tilt-telescoping steering function while keeping the memory seat functions enabled? I'm thinking that the hand control people just want to take the easy way out and possibly remove the fuse that controls the entire seat/steering memory function.
Here's my question:
I'm in a wheelchair and I need to install hand controls that operate the brakes and accelerator pedals in my newly purchased 2010 Hyundai Genesis V-6 Sedan. It has the Premium Nav package which means that it has the electronic Tilting-Telescoping Steering Column, integrated with the 2 Memory Seat functions for the Driver's seat.
The company that makes the hand controls says that in order for their hand controls to work, they have to disable the electronic Tilting-Telescoping Steering column. I can live with that part. However, they state that since the steering column is integrated with the memory seats, that the memory seats have to be disabled also.
Is there anyone out there who knows (or who can point me in the right direction of somebody who might know), how to isolate and disable the electronic tilt-telescoping steering function while keeping the memory seat functions enabled? I'm thinking that the hand control people just want to take the easy way out and possibly remove the fuse that controls the entire seat/steering memory function.