Exhaust for 3.8 V6 Sedan

[Kerpail]

Do you have stock tips still on it or aftermarket? I think if I do anything to mine next is secondary cat and resonator delete and replacing the resonator spot with a borla muffler.

Stock tips currently, but will likely get some quad tips in the coming months. Still looking for some.

 

[13WhiteGenisis]

Stock tips currently, but will likely get some quad tips in the coming months. Still looking for some.

The tips make a world of difference in my opinion. I went to my local advance auto and picked some up for around 32 a piece. It sounds more contained with the rolled tip rather than the stock flats.

 

[Kerpail]

The tips make a world of difference in my opinion. I went to my local advance auto and picked some up for around 32 a piece. It sounds more contained with the rolled tip rather than the stock flats.

Do you happen to know the stock outlet size of the exhaust piping? Or what would be the inlet size of the tips? I've read different measurements, from 2.25-2.5 inch but just want to confirm.

 

[13WhiteGenisis]

Do you happen to know the stock outlet size of the exhaust piping? Or what would be the inlet size of the tips? I've read different measurements, from 2.25-2.5 inch but just want to confirm.

The pipe itself is 2 and a quarter if I'm not mistaken. The stock tip inlet is goes into a 2.5 right after the mufflers.

 

[13WhiteGenisis]

The pipe itself is 2 and a quarter if I'm not mistaken. The stock tip inlet is goes into a 2.5 right after the mufflers.

I believe the different measurements come from the location people are measuring them at. I ran into the same dilemma I approached removing the mufflers with replacement 2.5 but it ended up being 2.1/4 so had to get more pipe than I anticipated on.

 

[genesis60]

I have a 2012 sedan 3.8L and I bought a 4.6L magnaflow catback exhaust and it bolted right on. Exhaust shop charged me $130 for installation and he said it was no big deal. It sounds sooo good and aggressive especially when you hit it!

Could you give me the link of the website you bought the exhaust off of?

 

[G-824585]

I have a 2015 hyundai genesis sedan and am looking to replace the muffler. However, I haven't been able to find the factory measurements for the inlet and outlet I would need on the new muffler. Does anyone know where to find these?

 

[Hewlent]

I am looking to replace my oem muffler with a performance muffler on my 2015 Hyundai Genesis sedan 3.8. However I haven’t been able to find the factory muffler inlet and outlet diameters anywhere. Does anyone know where to find these?

 

[dasobafemie]

I have a 2012 sedan 3.8L and I bought a 4.6L magnaflow catback exhaust and it bolted right on. Exhaust shop charged me $130 for installation and he said it was no big deal. It sounds sooo good and aggressive especially when you hit it!

$130?!!!! Dawg they want to charge me $500 here.