Genesis Floating / Spinning Wheel Center Caps

[Sal Collaziano]

Just noting that these floating/spinning wheel center caps also fit the 21" GV60 performance wheels.

 

[EVsquatch]

Just noting that these floating/spinning wheel center caps also fit the 21" GV60 performance wheels.

Sorry Sal, I lost track of this thread and posted to the "What have you done to your gv60 today" thread instead.

Sal was kind enough to send me a sample floating cap and I was able to confirm that they indeed do fit the 21" wheels so if anyone was hesitant because they were unsure of the fit, see pictures in Sal's post of my wheel.

Get them while they are still in stock!

 

[Sal Collaziano]

Just a quick note that we've found out the floating/spinning wheel center caps work with the 2022 GV70's 21” sport wheels.

 

[PaininDbutt]

So any of the 21” sport wheels then ?

 

[fourthirteen]

They fit the 19” wheels on my 2019 G80 Sport. Snapped right in. The collar on the spinners is not quite as wide as the OEM centerpiece so a little more of the wheel shows around it. Thanks Sal.

 

[Sal Collaziano]

So any of the 21” sport wheels then ?

I don't know about any. Not certain. I just know they work with the GV70's 21” sport wheels.

 

[Sal Collaziano]

They fit the 19” wheels on my 2019 G80 Sport. Snapped right in. The collar on the spinners is not quite as wide as the OEM centerpiece so a little more of the wheel shows around it. Thanks Sal.
View attachment 61459

Thank you!

 

[PaininDbutt]

Yes we have a 2023 3.5t Sport Prestiges so I’m sure they would work. I have them on our 24 GV80 Signature and they fit just fine.

 

[Sal Collaziano]

Three new sets have just arrived.

 

[Sal Collaziano]

One set left...

edit: GONE... Until next time!

______________________________

Help support this site so it can continue supporting you!

 

[Sal Collaziano]

...and they're finally back. I have three sets - and you know how long they last...

 

[red_gv70]

...and they're finally back. I have three sets - and you know how long they last...

Sal
I just became a GV70 owner (3.5 sport prestige) with the 21" wheels. I'd like to order a set if they fit. Please let me know
Thanks

 

[Sal Collaziano]

Sal
I just became a GV70 owner (3.5 sport prestige) with the 21" wheels. I'd like to order a set if they fit. Please let me know
Thanks

Hello and congratulations! They fit the 21 inch GV70 sport wheels. Scroll through the photos on the product page. I believe your wheels are the same as in the photos.

 

[red_gv70]

Hello and congratulations! They fit the 21 inch GV70 sport wheels. Scroll through the photos on the product page. I believe your wheels are the same as in the photos.

Thanks - done

where are you in FL? Driving down to Delray in 2 weeks

 

[Sal Collaziano]

Thanks - done

where are you in FL? Driving down to Delray in 2 weeks

Yes, I'm in Palm Beach County. Not very far from Delray Beach. Check your email for the tracking number.

 

[red_gv70]

Yes, I'm in Palm Beach County. Not very far from Delray Beach. Check your email for the tracking number.

lol, its the post office

 

[Sal Collaziano]

lol, its the post office
View attachment 63073

I hear ya. They'll get it situated.

 

[Riley2323]

Did you know that new Rolls Royce vehicles have floating wheel center caps? I didn't until recently - and thought it was pretty cool. I was surprised to find that Genesis actually makes these as well! Check 'em out at the link below...

Genesis Floating / Spinning Wheel Center Cap Set

These genuine Genesis floating wheel center caps mimic the new Rolls Royce vehicles where the Rolls Royce logo stays level while the wheels are moving. It's really unique and will make people take a second look and record video of your vehicle. Great if you like drawing attention and drive a...

kdmwarehouse.com

Has anyone tried to drill out the hub and nut covers on a 2023-2025 G90 21” wheels as DIY project?

I am guessing roughly a 59mm Forstner drill bit that fits the back diameter of the floating caps and then hopefully the center point of the bit makes short work of the eraser head sized nub on the back of the hub/nut covers and centers the bit perfectly. Seems like it would be easy with a link to the exact properly sized Forstner bit.

Or is anyone offering the hub/nut covers with these floaters already attached?