scottdk
Registered Member
scott, every window film I've removed took no more than some soapy water to dissolve the adhesive. as your pulling the film, you spray the glass behind it, let it sit a little, then continue to pull. the adhesive is water based. Once the film is off, a little more water and a razor blade to remove the rest. I've never had much trouble removing the film.
Same with putting it on, a little soapy water on the window, place the film and position it, then slowly squeegee out the water and bubbles starting in the middle. It's not that hard of a process.
It's not the hardest process to remove, just time consuming and makes a mess if not done properly. Soapy water can be used to loosen the adhesive for removal. Baby shampoo is used for application - soap is avoided due to the impurities in the formula, which sometimes can be seen trapped in between the film and glass after installation.