hood wing emblem size

[Big Poppie]

What is the size of the hood wing emblem suppose to be? the one that was sent to me was approx 6 1/4 inches. I have seen online that they are 7 1/4 inches which is correct emblem? by the way the one sent to me has the hollagram on the back so is this the factory size? thanks for input

 

[marty5marty]

What is the size of the hood wing emblem suppose to be? the one that was sent to me was approx 6 1/4 inches. I have seen online that they are 7 1/4 inches which is correct emblem? by the way the one sent to me has the hollagram on the back so is this the factory size? thanks for input

They are both from factory....i believe the smaller wings are from older models ( not 100% sure ) and the new ones got an inch bigger wings. i got the big ones and they are great!

 

[Mark_888]

The larger one is for the hood, and is very slightly curved to conform to the hood curve. The rear one for the trunk is slightly smaller and is flat. It may be a little hard to figure out which one is flat vs which one is curved unless the tabs are removed (or if you have both side by side).

 

[marty5marty]

The larger one is for the hood, and is very slightly curved to conform to the hood curve. The rear one for the trunk is slightly smaller and is flat. It may be a little hard to figure out which one is flat vs which one is curved unless the tabs are removed (or if you have both side by side).

But there are also bigger ones. Bigger front and bigger rear badge.

 

[Ruissimo]

Rear: 6 1/4" wing tip to wing tip, 2" shield height
Front: 7 1/4" wing tip to wing tip, 2.5" shield height

 

[geoffc]

I just ordered the 'new' Black Chrome Geneis enblems, and they are HUGE. Especially the front one. Part number actually says XL on it.

It's definately black chrome, same color as the head light housing on my R-Spec.

Old original (smaller) part numbers were 86330 3M500, new black chrome XL is 86330 3M530 for rear (about 6.5" width)

front, 86320 3M000 for old, verses black chrome XL 86320 3M530 (about 7.5" width)

pic added

 

[marty5marty]

I just ordered the 'new' Black Chrome Geneis enblems, and they are HUGE. Especially the front one. Part number actually says XL on it.

It's definately black chrome, same color as the head light housing on my R-Spec.

Old original (smaller) part numbers were 86330 3M500, new black chrome XL is 86330 3M530 for rear (about 6.5" width)

front, 86320 3M000 for old, verses black chrome XL 86320 3M530 (about 7.5" width)

pic added

Got the same ones! but there are also the non black chrome with the same sizes.

 

[ockevin]

I like the look of the black chrome. Very nice.

 

[Ruissimo]

I'm not 100% sure, but aren't the bigger ones the supposed "Prada Genesis Emblems"?

Someone was selling them as such... but I don't remember. I think the bigger ones might look better!

 

[Big Poppie]

thanks for the reply. these are the numbers on my packages.
86330 3M500 tail emblem
86320 3M000 hood emblem both bought from kdmland when i received them they measured the exact same size. called to complain, KDMLAND replied if the numbers are different you got the right ones. i tried to explain to the numb nuts but they couldn't get it through their heads. so i ordered hood emblem from a different source LCFT it was shipped with this number 86320 3M500 he also advertised larger size emblem. it came in over 1 1/4 inches larger. LOOKS GREAT. F--- kdmland. dont order from them. lol

______________________________

Help support this site so it can continue supporting you!

 

[Giant Robo]

I just ordered the 'new' Black Chrome Geneis enblems, and they are HUGE. Especially the front one. Part number actually says XL on it.

It's definately black chrome, same color as the head light housing on my R-Spec.

Old original (smaller) part numbers were 86330 3M500, new black chrome XL is 86330 3M530 for rear (about 6.5" width)

front, 86320 3M000 for old, verses black chrome XL 86320 3M530 (about 7.5" width)

pic added

I have the 86320 3M500 and it measures from wing-tip to wing-tip 7.25"