joe215
Getting familiar with the group...
It's terribly annoying to use the stereo interface to scroll through my 80 Gig Ipod to find the band I want to listen to. It can take more than a full minute of twisting the little knob on the stereo to get to a band in the "r-z" section of my Ipod.
I figured out a "work-around" until there is, hopefully, some kind of firmware release that will make it easier to navigate an Ipod on non-tech models.
1. Unplug your Ipod from the Hyundai cable
2. Scroll to the band you want to hear using the Ipod wheel
3. Press play on the Ipod
4. Plug the Hyundai cable back into the Ipod
This method takes about 5 seconds versus the minute or more using the stereo interface.
I figured out a "work-around" until there is, hopefully, some kind of firmware release that will make it easier to navigate an Ipod on non-tech models.
1. Unplug your Ipod from the Hyundai cable
2. Scroll to the band you want to hear using the Ipod wheel
3. Press play on the Ipod
4. Plug the Hyundai cable back into the Ipod
This method takes about 5 seconds versus the minute or more using the stereo interface.
