kocyk123
Registered Member
- Joined
- Feb 1, 2016
- Messages
- 519
- Reaction score
- 341
- Points
- 63
- Location
- Gilberts, IL
- Genesis Model Type
- 2G Genesis Sedan (2015-2016)
There are no other posts with instructions. Fuse box is located below:

There is a plastic cover that easily pops out. I was able to fish cables without additional disassembling.
When you add tap a fuse, make sure it is plugged in upward like on the picture below:

This guarantees correct polarity and safety.
As far a grounding goes, I popped the side cover and it had some bare metal so that is what I used.

I didn't have to disassemble anything in order to squeeze the tube between the trim.

There is a plastic cover that easily pops out. I was able to fish cables without additional disassembling.
When you add tap a fuse, make sure it is plugged in upward like on the picture below:

This guarantees correct polarity and safety.
As far a grounding goes, I popped the side cover and it had some bare metal so that is what I used.

I didn't have to disassemble anything in order to squeeze the tube between the trim.