jakecxvii
New member
- Joined
- Nov 13, 2023
- Messages
- 2
- Reaction score
- 0
- Points
- 1
- Genesis Model Year
- 2015
- Genesis Model Type
- 2G Genesis Sedan (2015-2016)
Hey everyone not sure if I'm posting in the right spot or not but I've been dealing with a very strange problem with my 2015 Hyundai Genesis Sedan. I'm getting close to 14 codes on my car but most consistent is U0101,U0109,U0001
Which are
Lost communication to TCM
Lost communication to FPCM
& Can Bus off.
I went through the visible wiring from the fuel pump control module (in the trunk) and the TCM module (under the hood) I'm starting to lose hope due to financial reasons I can't afford to take it to a professional and the car is basically un-drivable
It can be driving perfect for close to a mile then it drops to lower gear and revs close to 4500-5000rpm before shifting on its own, (A very hard shift) but once I pull over and kill the car and restart it then it starts driving good for a another mile or so. Everything I've been reading is saying it's sort of a simple problem usually wiring issues or a bad ground somewhere but I can't find a wiring diagram to track down the problem anyone have a similar issue?
Which are
Lost communication to TCM
Lost communication to FPCM
& Can Bus off.
I went through the visible wiring from the fuel pump control module (in the trunk) and the TCM module (under the hood) I'm starting to lose hope due to financial reasons I can't afford to take it to a professional and the car is basically un-drivable
It can be driving perfect for close to a mile then it drops to lower gear and revs close to 4500-5000rpm before shifting on its own, (A very hard shift) but once I pull over and kill the car and restart it then it starts driving good for a another mile or so. Everything I've been reading is saying it's sort of a simple problem usually wiring issues or a bad ground somewhere but I can't find a wiring diagram to track down the problem anyone have a similar issue?
Attachments
Last edited: