path914
Getting familiar with the group...
- Joined
- Nov 29, 2012
- Messages
- 63
- Reaction score
- 1
- Points
- 8
This may end up a bit long winded so bear with me...
As a preface, my previous cars have all been smaller and sportier than my current Genesis Sedan (Porsche 914, SVT Contour, Mazdaspeed 6, etc.) and heavily modified. This is typically my preference, however a growing family and 80 mile daily commute in traffic has led me to a larger, more comfortable option. I am generally happy with the Genesis as it is nice to have the comfort and auto while sitting in the parking lot that is my commute (I never thought nice and auto would come out of my mouth, lol).
However, there are a few things that really do not suit my tastes. One of them being the suspension tuning from the factory. Unfortunately, there are very few options available to correct this issue. The KDM Bilsteins are hard to get and cost twice as much as they are worth due to the shipping and small production and the only other options are low quality coil overs that I would never consider.
Soooooo... This has been an issue that has come up in several conversations between myself and various people I know who work in the suspension industry over the years. Recently, I was speaking with a friend who wrenches for a few race teams and he brought up the spring rubbers that Longacre produces for fine tuning race car spring rates. These spring rubbers are a really basic design, they just fit between the coils of the factory springs and based on the durometer, increase the overall spring rate slightly. My feeling was that by increasing the spring rate slightly, there would be a better match to the shocks which would benefit the handling and ride as well.
After taking some measurements and contacting Longacre in regards to my plans, they confirmed that they had some of the spring rubbers that would fit. Although they sell them in a wide range of durometers, they recommended using one of the two stiffest models, either Blue 50 or Black 70. I chose to try the Blue model as an initial test. Installation is as easy as it comes... cut the spring rubber so that it can separate and follow the spring, raise the car slightly, put it in place in the middle of the coils and lower the car.
After driving with the spring rubbers installed for two weeks and around 500 miles, I am more than pleasantly surprised. I was just hoping for a slight improvement and a lack of negative trade-offs. What I have found it that they have made a significant improvement in both the ride comfort and handling of the car. Granted, they are no replacement for a quality set of matched shocks and springs, but there is noticeably less dive, squat and lean. Also, they seem to have negated some of the sharp impacts that I have always experienced in this car, which I take to confirm my thoughts about the suspension being overdampened and/or undersprung from the factory.
The only negative has been the cost, which at $36.95 per corner plus shipping seems like a ridiculous amount for a few pieces of rubber. However, when looking at it from the perspective of the increased satisfaction I get while driving, it is a cost that I would gladly pay. Hell, its only $40 more than the rigid collars I purchased which provided a much more minor effect.
Anyway, I just wanted to share my experience and let the community know of another possible option for those of us who like to tinker and improve our cars. YMMV...
Longacre Coil Spring Rubbers
As a preface, my previous cars have all been smaller and sportier than my current Genesis Sedan (Porsche 914, SVT Contour, Mazdaspeed 6, etc.) and heavily modified. This is typically my preference, however a growing family and 80 mile daily commute in traffic has led me to a larger, more comfortable option. I am generally happy with the Genesis as it is nice to have the comfort and auto while sitting in the parking lot that is my commute (I never thought nice and auto would come out of my mouth, lol).
However, there are a few things that really do not suit my tastes. One of them being the suspension tuning from the factory. Unfortunately, there are very few options available to correct this issue. The KDM Bilsteins are hard to get and cost twice as much as they are worth due to the shipping and small production and the only other options are low quality coil overs that I would never consider.
Soooooo... This has been an issue that has come up in several conversations between myself and various people I know who work in the suspension industry over the years. Recently, I was speaking with a friend who wrenches for a few race teams and he brought up the spring rubbers that Longacre produces for fine tuning race car spring rates. These spring rubbers are a really basic design, they just fit between the coils of the factory springs and based on the durometer, increase the overall spring rate slightly. My feeling was that by increasing the spring rate slightly, there would be a better match to the shocks which would benefit the handling and ride as well.
After taking some measurements and contacting Longacre in regards to my plans, they confirmed that they had some of the spring rubbers that would fit. Although they sell them in a wide range of durometers, they recommended using one of the two stiffest models, either Blue 50 or Black 70. I chose to try the Blue model as an initial test. Installation is as easy as it comes... cut the spring rubber so that it can separate and follow the spring, raise the car slightly, put it in place in the middle of the coils and lower the car.
After driving with the spring rubbers installed for two weeks and around 500 miles, I am more than pleasantly surprised. I was just hoping for a slight improvement and a lack of negative trade-offs. What I have found it that they have made a significant improvement in both the ride comfort and handling of the car. Granted, they are no replacement for a quality set of matched shocks and springs, but there is noticeably less dive, squat and lean. Also, they seem to have negated some of the sharp impacts that I have always experienced in this car, which I take to confirm my thoughts about the suspension being overdampened and/or undersprung from the factory.
The only negative has been the cost, which at $36.95 per corner plus shipping seems like a ridiculous amount for a few pieces of rubber. However, when looking at it from the perspective of the increased satisfaction I get while driving, it is a cost that I would gladly pay. Hell, its only $40 more than the rigid collars I purchased which provided a much more minor effect.
Anyway, I just wanted to share my experience and let the community know of another possible option for those of us who like to tinker and improve our cars. YMMV...
Longacre Coil Spring Rubbers