lower control arm damage, do i need an alignment?

[Andrewsandlin]

i drive my 2011 hyundai genesis 3.8l sedan pretty hard. been hearing a lot of suspension noise and decided to investigate. i know a little when it comes to working on cars so i was able to replace my lower control arm. i know just from my human eyes i cannot tell if my car is out of alignment. it looks like the passenger front wheel has a lot of camber either + or - idk but it appears to have camber. as i was replacing the control arm i was also looking for camber bolts and i could not see any. my question is do these cars have camber adjustment at all? i called 2 different shops and both said around 80 for a 4 wheel alignment so its not the end of the world but if its just toe at the front i can do that and an alignment shop would simply be waste of time. any recs?

 

[raggedy]

whatever damaged that control arm likely knocked your alignment out of spec too. Camber bolts would not come stock. 80 dollars for a legit 4 wheel alignment is cheap in my area! If it were me I'd take it in and get it done professionally before you discover uneven treadwear.

 

[APS]

I think you knew the answer before you posted your question