clakowicz@comcast.net
Registered Member
- Joined
- Oct 25, 2008
- Messages
- 12
- Reaction score
- 0
- Points
- 0
I have the 4.6 with tech package and find that backing up activates the camera (very helpful) and dropped both rearview mirrors to show the ground around the backtires (also helpful if I am looking to miss a curb, othewise not so much)
I made a recent discovery (someone tell me where this is in the manual(s) When I put the car in reverse I found that if I toggle the rearview mirror selector to center position neither mirror drops, or if they are dropped they both come back to normal. If I move the switch to the left detent both mirrors drop upon backing. If I switch the toggle to the right side mirror position only the right mirror drops. The mirrors will respond to whatever toggle position you leave. Example: leave the toggle inthe center postion and put it in park, when you go to reverse the mirrors remain in normal positon. And if you come up on say a curb on your right just toggle to the right and the right mirror drops to assist you. Too cool. Try it. this was an easter egg find for me.
4.6 w/tech blk/blk
I made a recent discovery (someone tell me where this is in the manual(s) When I put the car in reverse I found that if I toggle the rearview mirror selector to center position neither mirror drops, or if they are dropped they both come back to normal. If I move the switch to the left detent both mirrors drop upon backing. If I switch the toggle to the right side mirror position only the right mirror drops. The mirrors will respond to whatever toggle position you leave. Example: leave the toggle inthe center postion and put it in park, when you go to reverse the mirrors remain in normal positon. And if you come up on say a curb on your right just toggle to the right and the right mirror drops to assist you. Too cool. Try it. this was an easter egg find for me.
4.6 w/tech blk/blk
Last edited: