Seatbelt hitting plastic

[FrankieD]

Hey all...has anyone come up with a hack for stopping the seatbelt from hitting the plastic while windows are open, aside from buckling it?

Thanks

 

[Mr. Incredible]

Found this on an Alpha forum

DIY - Prevent Seat Belt Buckle from Hitting B Pillar

After three weeks with the Giulia I grew concerned with how much and how hard the seat belt buckle bangs against the lower part of the B pillar. So I decided to do something about it! I got these felt pads from my local WalMart and just cut the felt to fit the back of the buckle. Cheap and easy...

giuliaforums.com

I just keep mine buckled. Rears also as they flap when all windows are open.

 

[Slip_Angle]

Great timing on this thread. It was annoying me yesterday! Mine hits even when the widows are closed...IE: taking bumpy corners etc..

I may try the felt solution.

 

[KarmaPolice]

I've adjusted the height all the way to the top, find it's less noticeable now.

 

[Slip_Angle]

I put a piece of felt on the edge, so we'll see if it stops clunking.

 

[FastEddie]

Bouncing passenger belt buckle fix

A small annoyance of driving with the windows down is that the passenger belt buckle bounces against plastic door pillar cover. I came up with a cheap and easy solution. Pack of 3 Neodymium disc magnets from home depot Gorilla tape soft velcro Open both passenger side doors and pull the...

genesisowners.com

 

[Husky]

Great timing on this thread. It was annoying me yesterday! Mine hits even when the widows are closed...IE: taking bumpy corners etc..

I may try the felt solution.

Funny, I just had that happen yesterday as well. It only seems to happen when the windows are at certain positions.

 

[Iggy]

Bouncing passenger belt buckle fix

A small annoyance of driving with the windows down is that the passenger belt buckle bounces against plastic door pillar cover. I came up with a cheap and easy solution. Pack of 3 Neodymium disc magnets from home depot Gorilla tape soft velcro Open both passenger side doors and pull the...

genesisowners.com

 

[Slip_Angle]

The small strip of felt did it for me... Took a minute to do it..