• Car enthusiast? Join us on Cars Connected! iOS | Android | Desktop
  • Hint: Use a descriptive title for your new message
    If you're looking for help and want to draw people in who can assist you, use a descriptive subject title when posting your message. In other words, "I need help with my car" could be about anything and can easily be overlooked by people who can help. However, "I need help with my transmission" will draw interest from people who can help with a transmission specific issue. Be as descriptive as you can. Please also post in the appropriate forum. The "Lounge" is for introducing yourself. If you need help with your G70, please post in the G70 section - and so on... This message can be closed by clicking the X in the top right corner.

Spots that look like rust on paint

LPA820

New member
Joined
Feb 3, 2024
Messages
4
Reaction score
0
Points
1
Genesis Model Year
2023
Genesis Model Type
Genesis G70
I bought my 2023 Genesis G70 slightly used a couple months ago. I recently noticed little spots on the trunk and rear bumper that look like rust spots. Most of them are roughly the size of a grain of sand, but some are slightly larger. They won’t wipe off and I’ve tried using a clay bar treatment as that was recommended by a friend. It didn’t work.

Does anyone know what these are and how to clean them properly? I find it hard to believe that a car that’s less than a year old is rusting and only on the trunk and rear bumper.
 

Attachments

  • IMG_2108.webp
    IMG_2108.webp
    28.9 KB · Views: 24
  • IMG_2109.webp
    IMG_2109.webp
    20 KB · Views: 24
  • IMG_2111.webp
    IMG_2111.webp
    23.6 KB · Views: 24
Last edited:
Did you try some polish or rubbing compound?
 
Looking to update and upgrade your Genesis luxury sport automobile? Look no further than right here in our own forum store - where orders are shipped immediately!
Those deposits are most likely iron oxide fallout from both your brakes and the environment in general (factories, roads, polution, etc.). You need to use a spray-on iron remover like Carpro IronX or Adam's Iron Remover. You spray it on before you wash/clay the car, let it dwell for about 2 minutes (NEVER in sunlight though), and rinse it off; then do the rest of your car cleaning. The spray causes an exothermic reaction with the metal particles, making the edges rounded that are then more easily flushed away with your hose.

I've used several brands and they all work the same way. The reaction emits a sulfur smell, but goes away when you rinse it. Here's a snippet from the item description.

1707019872241.webp
 
^^
This.
If you live in an area with snowy winters then you may find this will need to be treated with Iron X every spring, particularly if there is lot's of salt and snowplows. The large metal plow blade runners that are grinding off bits of metal combined with salt contribute to this. Iron X is very effective in removing the tiny bits of iron that become embedded in the finish.
 
Forgot I posted this, but incase anyone sees this post in the future, my solution was similar to what Xamnosidda said. I can't remember the exact brand (might've been IronX, might've been something else suggested to me), but I bought a solution to spray onto the car and did a clay bar treatment after that. It took some elbow grease but it completely removed the spots shown in the pictures.
 
Back
Top