2013 genesis sedan 3.8 intake

[g_447084]

I can never find any cold air intakes for my 2013 genesis 3.8 sedan. Was wondering if one for the coupe 3.8 would still fit in my sedan since they’re the same engine? Lmk as soon as possible thank you

 

[Cali Gen]

nope they wont. and there really isnt a true cold air intake for the sedans lol.. I bought this however anyway and am in the works of custom fabbing a heat shield for it

Injen Short Ram Intake for the Hyundai Genesis Sedan 2014 3.8L V6

 

[DaNooch]

I can never find any cold air intakes for my 2013 genesis 3.8 sedan. Was wondering if one for the coupe 3.8 would still fit in my sedan since they’re the same engine? Lmk as soon as possible thank you

I just installed the Injen intake form my 2014 3.8 Sedan.. I'm very happy with it. You retain the factory hood scoops, ducting a ton of fresh air to the large dry filter. The finish was extremely well done and the fit was nearly perfect.

The factory intake has multiple silencing chambers and ducts on it to make it as quiet as possible. Once installing this, the engine gains a deep aggressive growl under power, yet remains nearly silent with around town driving.

I highly recommend it, a heat shield is very simple to mock up. Injen is a very reputable intake designer.. in fact the only other company I would purchase an intake from would prob be AEM..

 

[Cali Gen]

I just installed the Injen intake form my 2014 3.8 Sedan.. I'm very happy with it. You retain the factory hood scoops, ducting a ton of fresh air to the large dry filter. The finish was extremely well done and the fit was nearly perfect.

The factory intake has multiple silencing chambers and ducts on it to make it as quiet as possible. Once installing this, the engine gains a deep aggressive growl under power, yet remains nearly silent with around town driving.

I highly recommend it, a heat shield is very simple to mock up. Injen is a very reputable intake designer.. in fact the only other company I would purchase an intake from would prob be AEM..

Have this same intake. The 2014 will fit the 2013 3.8 can confirm. The filter on it is huuuge bigger than k & n. The sound is great but yes I would advise mocking up a heat shield.. very easy to do as you get plenty of room to work with with this intake

 

[MG8]

looking for more power , get the btr tune they have one for the 3.8

 

[DaNooch]

looking for more power , get the btr tune they have one for the 3.8

Yes I've looked at them.. it's just $900+ is a lot of cash to drop for a tune.. Not so sure I will ever nite the bullet on that. Plus it's a "can" tune, it's not anything like strapping the car to a dyno and mapping it out perfectly. I come from GM performance cars where you pay a tuner $350 he plugs in to the factory ECU with HPtuners or Accel efi and gets the car perfect.
The BTR tune has to be pretty dang impressive for that price.. I just ordered a set of secondary cat deletes and then I'm going to be focusing on all of the suspension. ARK springs, ultra subframe components, collars etc.

For those that do not know Whiteline AUS makes an amazing front and rear sway bar kit for the BH platform.. Shipping is a bear tho.

 

[Oldman-Gen1]

Yes I've looked at them.. it's just $900+ is a lot of cash to drop for a tune.. Not so sure I will ever nite the bullet on that. Plus it's a "can" tune, it's not anything like strapping the car to a dyno and mapping it out perfectly. I come from GM performance cars where you pay a tuner $350 he plugs in to the factory ECU with HPtuners or Accel efi and gets the car perfect.
The BTR tune has to be pretty dang impressive for that price.. I just ordered a set of secondary cat deletes and then I'm going to be focusing on all of the suspension. ARK springs, ultra subframe components, collars etc.

For those that do not know Whiteline AUS makes an amazing front and rear sway bar kit for the BH platform.. Shipping is a bear tho.

Just looked at that website, it says free shipping to lower 48 states. Although I confused by there application guide, on the international site it shows the genesis sedan, but when you go to the U.S. site it only lists the coupe?

 

[DaNooch]

Just looked at that website, it says free shipping to lower 48 states. Although I confused by there application guide, on the international site it shows the genesis sedan, but when you go to the U.S. site it only lists the coupe?

Correct you have to buy it on the international site and pay the shipping or contact a US white line vendor and get them to bring it over

 

[Oldman-Gen1]

Correct you have to buy it on the international site and pay the shipping or contact a US white line vendor and get them to bring it over

Well, something is not right. The part number for the sedan on the international site, is the same as the coupe on the U.S site?????

 

[DaNooch]

You cant trust a non us part number..

The only way you are going to get anything sold to you and shipped from Australia is by calling them. They wont take emails seriously. And just FYI youre going to be looking at over $200 shipping easily.

______________________________

Help support this site so it can continue supporting you!

 

[Oldman-Gen1]

You cant trust a non us part number..

The only way you are going to get anything sold to you and shipped from Australia is by calling them. They wont take emails seriously. And just FYI youre going to be looking at over $200 shipping easily.

Could you post a picture of the cold air intake that you installed?

 

[Oldman-Gen1]

Have this same intake. The 2014 will fit the 2013 3.8 can confirm. The filter on it is huuuge bigger than k & n. The sound is great but yes I would advise mocking up a heat shield.. very easy to do as you get plenty of room to work with with this intake

Could you post a picture of your cold air intake?

 

[DaNooch]

Could you post a picture of your cold air intake?

Like of jt on the car or the website where j bought it??

 

[Cali Gen]

Could you post a picture of your cold air intake?

This is for a 2013 3.8

 

[Oldman-Gen1]

Like of jt on the car or the website where j bought it??

Yes, on car. I just wanted to see how it looks before I purchase. Thanks

 

[Oldman-Gen1]

This is for a 2013 3.8

Nice, thank you.

 

[DaNooch]

Yes, on car. I just wanted to see how it looks before I purchase. Thanks

You can put the factory engine cover back on. Heres a pic of the intake on my 14 with the cover.

 

[Cali Gen]

I know I just took mine ofoff so he could see the whole thing and see how it attached to the TB

 

[DaNooch]

Its all good. I didn't know if you had yours off on purpose or not.

 

[Oldman-Gen1]

Thanks for the pictures, I am contemplating doing this mod, but was unsure if this was just a coupe mod modified for the sedan. Both cars look great!