Eelectric Exhaust Cut Outs

[Driv200]

Sjphill, u r in the loop.

 

[nextcar]

to the OP:

i looked thru your posts but could not find which company made the electric cutouts and x-pipes.

if i order these parts, do you think i can find some local shop that can install them?
I live in SoCal, inland empire.

 

[10genesis]

Your genny sounds awesome, where can I purchase the kit.
Thanks

 

[brfatal]

I'm planning on a V8 purchase soon and was wondering if there's any issue with them hitting water? Our weather in FL during the summer months can be very unpredictable. Is all the wiring etc. well insulated...what if they happen to be open and you do hit standing water, any issues with potential backwash into the exhaust system? Thanks....your mod's to the car sound great !!

Splashes of water are not generally the problem. It's corrosion I'd worry about. The valves like to seize and many of the kits on the market come with very poor motors. Nearly 100% of electric cuts outs fail. I don't know anyone who has ever had one that hasn't.

 

[20124.6]

would love to have this setup, where can i purchase and anybody in AZ, Vegas, or southern Cal able to put the system in. Any good shops in AZ.

 

[StangKiller]

Hey Driv200 - I sent you a PM but couldn't locate it in my sent items box so not sure if you received it.

I'm ready to pull the trigger and was wondering if you could help me with the logistics. Can you PM me with first steps?

Thanks,

-Adam

 

[StangKiller]

So I just realized that Abel Racing is only about 300 miles from where I live. It would probably be better to cruise down there with all of my parts after making an appt. to have them installed. I wonder if they could do CAI and EE cutouts with switch all in one day...

Driv - you should meet me there if it's not too far of a drive for you.

-A

 

[Driv200]

Hey guys, thanks for your interest and PM's. I'm building new systems and it's a big project to take on b/c of tolerance and the art of the custom welding. I can't speak for other potential builders/installers who could do this. I'm sure others could. My advantage is having a proven test fitted set up. Also, I am building the custom metal bracket for switch mount under drivers seat.

Corrosion:

6061 T6 billet aluminum housing
Doubled sealed housing
303 stainless steel butterfly
Stainless other bits

I think overtime, everything is at the mercy to mother nature.

Last chance

 

[Bglin]

Count me in - This sounds great.
Add me to the list of purchasers.
Thanks!

 

[Driv200]

Re: Eelectric Exhaust Cut Outs - New install

*

______________________________

Help support this site so it can continue supporting you!

 

[OneFunGenesis]

^ You removed them?

 

[Driv200]

Here you go. Thread gets buried if I don't check forum in awhile. Hope this helps.

Answered PM's: "Several looking for build thread"

 

[OneFunGenesis]

So you mentioned the removal of the x-pipe, right? What are your putting in place? H-Pipe? No pipe?

 

[Driv200]

Thats the mystery question. Dyno shows Zero bump in power with the dumps open. Zero loss too. The freedom you have with these electronic dumps is so versatile, you never run the dump fully open all the time......so the X-pipe is overkill and labor intensive. I find myself opening the exhaust when cool cars around, under bridges, parking garages, and occasional "drop the hammer for the heck of it" run..... Okay, and right after I drop off the wife at the mall.

Point is, when closed, the exhaust is back to stock and the X-pipe not needed. Your concern is the sound still going to ROCK without the bend forcing air through X-pipe...right?

The valve makes it a forced out....not passive....so I assume it will sound same. Want one?

 

[OneFunGenesis]

I do and I don't. Because now, with the removal of the x-pipe, it just becomes a simple exhaust job. I would probably pay $100 for this job (not including the cut-outs) at my local shop.

I would assume now it's just cutting pipe to length, clamping or welding in the cutouts and bolting it up. But I am also concerned about sound/airflow out of the cutouts without the bend, yes.

 

[ockevin]

any updates on a reduced price kit...????

 

[13rooks]

can you PM me for the price??? abel did not respond me for all the instalation if it's dificult or not,the price, shipping to quebec canada,there been two week i'm waiting at..so can you PM for those question if you can!!!
thanks

 

[Driv200]

Sure

 

[kf4zra]

I too am interested in any information you can provide.
i send you a visitor message because i was unable to PM or email you.
I am interested in the electronic cutout kit as well

John

 

[brfatal]

Were you ever able to get the price down?