Illuminated Door Scuff Plates

[BlueGV80]

Does anyone know if the illuminated Door Scuff Plates option available for the 2022 GV80 can be installed on the 2021 GV80?

 

[Krash]

Does anyone know if the illuminated Door Scuff Plates option available for the 2022 GV80 can be installed on the 2021 GV80?

do not know if it can be installed on 21--probably can. I installed lighted scuff plates from Hi Motors in South Korea.. You can find them at Himotors.com

 

[PMCErnie]

Contact the seller. Ask if the wiring is in place for plug and play installation. Otherwise, you will have to wire it.

HI-MOTORS

Accent 11~,Azera 12~(Grandeur HG),Azera 06~11 (Grandeur TG),Elantra 16~(Avante AD),Elantra 14~15(New Avante MD),Elantra 2010~2013(Avante MD),Genesis 2014~,Genesis Coupe,Genesis(2010~2013),H1(Grand Starex),i30 2012~(Elantra GT),I40 2011~(Saloon),SantaFe 2013~2016(ix45),SantaFe 2010~2012,SantaFe...

hi-motors.com

 

[BlueGV80]

do not know if it can be installed on 21--probably can. I installed lighted scuff plates from Hi Motors in South Korea.. You can find them at Himotors.com

Thank you I will look into it.

 

[BlueGV80]

Contact the seller. Ask if the wiring is in place for plug and play installation. Otherwise, you will have to wire it.

HI-MOTORS

Accent 11~,Azera 12~(Grandeur HG),Azera 06~11 (Grandeur TG),Elantra 16~(Avante AD),Elantra 14~15(New Avante MD),Elantra 2010~2013(Avante MD),Genesis 2014~,Genesis Coupe,Genesis(2010~2013),H1(Grand Starex),i30 2012~(Elantra GT),I40 2011~(Saloon),SantaFe 2013~2016(ix45),SantaFe 2010~2012,SantaFe...

hi-motors.com

Thank you! I appreciate the info

 

[PMCErnie]

Thank you! I appreciate the info

Manufacturers do strange things. For example, I installed plug and play lighted sill plates in my ‘12 Genesis. The plug and play wiring fortunately was there so no wiring was necessary. Installation took me 20 minutes.

Owners of ‘15 Genesis models weren’t so lucky and their cars came without the plug and play wiring. They could still install the LED sill plates, but also had to run the wiring. That certainly reduced aftermarket sill plate sales.

 

[BlueGV80]

Manufacturers do strange things. For example, I installed plug and play lighted sill plates in my ‘12 Genesis. The plug and play wiring fortunately was there so no wiring was necessary. Installation took me 20 minutes.

Owners of ‘15 Genesis models weren’t so lucky and their cars came without the plug and play wiring. They could still install the LED sill plates, but also had to run the wiring. That certainly reduced aftermarket sill plate sales.

You right about that. Hopefully I get lucky

 

[GenGuy68]

Does anyone know if the illuminated Door Scuff Plates option available for the 2022 GV80 can be installed on the 2021 GV80?

Do you have a part number? I purchased a 2023 GV80 and was told no OEM option for an illuminated door scuff plate. I have searched the web high and low and could not even find a part number / called a Genesis parts dealer and the couldn’t find a part number for any year. Any help would be appreciated.

 

[DaleNet]

My GV80 came with them as an accessory. I checked my window sticker, but it does not have a part number.

I did a search and found this: Part #:T6F69AU000

It is the manufacture's part number for the 2022 GV80, but there is no change in the 2023.

Here is the link to the page: Door Sill Plates, Illuminated - Helps protect your vehicle from scratches and scuffs. Door Sill Plates come as a set of two. Installation of this item is a full replacement and is not a simple cover over.

 

[GenGuy68]

Thank you very much.

______________________________

Help support this site so it can continue supporting you!

 

[DaleNet]

You're welcome.

 

[BillZ]

It seems clear from the installation instructions for the part number given above that wiring is not an issue. The light in the sill plate uses replaceable batteries.

 

[DaleNet]

That is correct. It uses a magnet that you attach to the door to turn it on or off.

 

[BlueGV80]

I believe the third party one from HI-Motors does require wiring.

 

[Gen emil]

I’m assuming these are only for the front doors?

 

[Krash]

I believe the third party one from HI-Motors does require wiring.

yes it does and they are available for both front and back doors. They turn on and off with opening the door. Mine were installed with a tiny 1/8 inch hole drilled into the side of the sill plate to get to wiring. If you look close when you see them you can see about 1/8 inch wire showing, but no one notices.

 

[Chill Will]

yes it does and they are available for both front and back doors. They turn on and off with opening the door. Mine were installed with a tiny 1/8 inch hole drilled into the side of the sill plate to get to wiring. If you look close when you see them you can see about 1/8 inch wire showing, but no one notices.

Do you know where they tapped into the power from?

 

[Krash]

Do you know where they tapped into the power from?

Do not know specifically, but it has to be the circuit that when you open the door the inside lights go on as well as the sill plates. If you know which wire controls those, it probably is that. The shop that did my plates and retractable, lighted running boards has a computer subscription to a company that shows all the wiring diagrams to cars-that is how he knew what wires to use.

 

[03clyde genesis]

Mine are battery operated, factory installed on my '22 GV80. Battery is a the small disc type and is located beneath the scuff plate.

 

[G-477995]

Do you have a part number? I purchased a 2023 GV80 and was told no OEM option for an illuminated door scuff plate. I have searched the web high and low and could not even find a part number / called a Genesis parts dealer and the couldn’t find a part number for any year. Any help would be appreciated.

T6F69AU000