Inhibitor Switch/Cable shifter issues

[schniper23]

Hey everyone, hopefully this thread becomes active as I can get many responses and experiences from you all. My car is having an issue with the shifting box where it will sometimes not know what gear I select and I get a P0705 for the range sensor(inhibitor switch) code. This happens occasionally but will go away. It got so bad once I replaced the sensor and it fixed it, until the shifter kept popping out of drive into neutral. Now, I’m wondering if anyone else has this issue with their shifter cable/inhibitor switch. I adjusted it a number of times but it always seems to get out of sync and cause trouble, the thing is so very touchy. Anyone else?

 

[hawkeye99]

Hey everyone, hopefully this thread becomes active as I can get many responses and experiences from you all. My car is having an issue with the shifting box where it will sometimes not know what gear I select and I get a P0705 for the range sensor(inhibitor switch) code. This happens occasionally but will go away. It got so bad once I replaced the sensor and it fixed it, until the shifter kept popping out of drive into neutral. Now, I’m wondering if anyone else has this issue with their shifter cable/inhibitor switch. I adjusted it a number of times but it always seems to get out of sync and cause trouble, the thing is so very touchy. Anyone else?

Any fixes for this. I'm having the same issue.

 

[Gunkk]

Here's the troubleshooting detail for the inhib switch:

 

[hawkeye99]

Manual control lever was seized, and the bolt had a hair line crack in it. Both were replaced and the shifter feels really nice now.