Cut-Throat
Registered Member
I was wondering if there is an option to silence the seat belt alarm on the Genesis?
I could do this on other cars that I have owned. Mostly it was not a feature that was in the owners manual, but It was shared on forums like this.
As an example on my Lexus GS350 had an Undocumented feature to silence the seat belt buzzer. Maint guys used this when troubleshooting the car:
*********************************************************
Instructions to turn off Seat Belt Alarm
"b-off" indicates that the buzzer is OFF. "b-on" indicates that the buzzer is ON.
(A) Driver and front passenger side seat belt buzzers.
(01) Turn the ignition switch to the ON position.
(02) Press the ODO/TRIP switch until the odometer displays "ODO".
(03) Turn the ignition switch off.
(04) Turn the ignition switch to the ON position.
(05) Press the ODO/TRIP switch immediately (within 6 seconds) and hold it down for 10 seconds or more.
(06) Continue holding down the ODO/TRIP switch and fasten the driver side seat belt.
(07) Check that the odometer displays either "b-on" or "b-oFF".
(08) Press the ODO/TRIP switch to change the display to "b-oFF".
(09) Turn the ignition switch off.
(10) Turn the ignition switch to the ON position.
(11) Check that no buzzer sounds.
*********************************************************
I could do this on other cars that I have owned. Mostly it was not a feature that was in the owners manual, but It was shared on forums like this.
As an example on my Lexus GS350 had an Undocumented feature to silence the seat belt buzzer. Maint guys used this when troubleshooting the car:
*********************************************************
Instructions to turn off Seat Belt Alarm
"b-off" indicates that the buzzer is OFF. "b-on" indicates that the buzzer is ON.
(A) Driver and front passenger side seat belt buzzers.
(01) Turn the ignition switch to the ON position.
(02) Press the ODO/TRIP switch until the odometer displays "ODO".
(03) Turn the ignition switch off.
(04) Turn the ignition switch to the ON position.
(05) Press the ODO/TRIP switch immediately (within 6 seconds) and hold it down for 10 seconds or more.
(06) Continue holding down the ODO/TRIP switch and fasten the driver side seat belt.
(07) Check that the odometer displays either "b-on" or "b-oFF".
(08) Press the ODO/TRIP switch to change the display to "b-oFF".
(09) Turn the ignition switch off.
(10) Turn the ignition switch to the ON position.
(11) Check that no buzzer sounds.
*********************************************************
Last edited: