• Car enthusiast? Join us on Cars Connected! iOS | Android | Desktop
  • Hint: Use a descriptive title for your new message
    If you're looking for help and want to draw people in who can assist you, use a descriptive subject title when posting your message. In other words, "I need help with my car" could be about anything and can easily be overlooked by people who can help. However, "I need help with my transmission" will draw interest from people who can help with a transmission specific issue. Be as descriptive as you can. Please also post in the appropriate forum. The "Lounge" is for introducing yourself. If you need help with your G70, please post in the G70 section - and so on... This message can be closed by clicking the X in the top right corner.

Need help with p0497 code

MrSheep

New member
Joined
Oct 5, 2020
Messages
9
Reaction score
0
Points
1
Genesis Model Type
1G Genesis Sedan (2009-2014)
So I’ve been having trouble with my car lately I’ve change the front purge valve twice to see if the first one was bad after that I rest the engine light came back on after a day and a half then I changed the gas cap reset the light came back on after a day and a half changed the whole charcoal canister including the side piece it has the filter and reset the light a day and half pass the light comes on so now I’m not sure what it could be I’m not sure if it’s the black tubes if they have a hole on them but I made sure all connections where on well and tight on anyone have any idea or have same problem?
 
Looking to update and upgrade your Genesis luxury sport automobile? Look no further than right here in our own forum store - where orders are shipped immediately!
.
 
So I’ve been having trouble with my car lately I’ve change the front purge valve twice to see if the first one was bad after that I rest the engine light came back on after a day and a half then I changed the gas cap reset the light came back on after a day and a half changed the whole charcoal canister including the side piece it has the filter and reset the light a day and half pass the light comes on so now I’m not sure what it could be I’m not sure if it’s the black tubes if they have a hole on them but I made sure all connections where on well and tight on anyone have any idea or have same problem?
So I've been having trouble with reading internet posts recently when the OP doesn't use any punctuation it's really hard to read when there are no capital letters the use of punctuation really helps make reading long run-on sentences more readable when the poster is doing the stream of consciousness thing it's much easier to read when punctuation and capital letters are used I really could help with some links or something with the P0497 code but it's hard to read the OP and understand the actions taken and whether the OP actually looked for wiring faults or checked fuses or checked resistances across the purge and vent solenoids or looked for bugs clogging up the vent it's not too hard if you do a little research and oh yeah did I say punctuation and proper sentence formatting helps
 
So I’ve been having trouble with my car lately I’ve change the front purge valve twice to see if the first one was bad after that I rest the engine light came back on after a day and a half then I changed the gas cap reset the light came back on after a day and a half changed the whole charcoal canister including the side piece it has the filter and reset the light a day and half pass the light comes on so now I’m not sure what it could be I’m not sure if it’s the black tubes if they have a hole on them but I made sure all connections where on well and tight on anyone have any idea or have same problem?
Did you ever get the problem fixed I'm having the same issue with my Genesis, please met me know if you were able to find the issue.
 
Back
Top