1. Disconnect the battery. I had to put a ball of paper towels under the (-) terminal because there was no slack for it to stay away from the battery.
2. Unscrew the two (star) screws on either side of the steering
wheel.
3. Pull SRS towards you and look behind to see whats going on.
4. Disconnect the ground and the 2 black and red
plugs. This is where using a very small flat head will come in handy. You need to pop the yellow clips upward to release the
plugs.
5. Now the SRS is completely disconnected.
6. Now follow all the steps in reverse to put the new winged
badge SRS airbag on and enjoy.
*Please remember that you are doing this at your own risk. I am not responsible for anyone or any product you purchase. Also keep in mind that this was how I installed my SRS airbag. You may choose to do so differently.