To those that have driven the R-Spec and have owned a Genesis in the past for at least 3 months--- Has the suspension been improved when on bumpy roads??
Thanks
Suspension was upgraded for 2010 model (and now again for 2012). The 2009 was noticeably "bumpier" than 2010-2011 models, which is why I upgaded my 2009 suspension (springs, shocks/struts, and rear stabilizer) to 2010 specs, and feel it is an improvement. With the addition of Michelin tires, I am now satisfied with my 2009 ride characteristics (although 2012 non-R-Spec Genesis is even better).I have the 2009 sedan and it's very bumpy on country roads. I assume the suspension is the same 2009-2011. Has it changed at all for the 2012 R-Spec? The other reviews said it was bumpy but... as bumpy as the 2009-2011? It seems you don't own the car. I only want to hear from people that have owned this car for a reasonable amount of time.
Most of the part numbers for 2009 and 2010 suspension parts are different, as are the parts themselves, so there is a difference. I made the change on my car, and can notice the difference. There are several others who also made the change and posted detailed analysis of the part number differences and their experience with the difference between 2009 and 2010 ride quality.I drove the 2010 and 2009 before buying and the suspension was the same to me so I bought the 09 because I could get a better deal. So I believe the 09 thru 11 is the same suspension no matter what you read. The nearest dealer is an hour away. I'll just get over there and test drive the 2012 for myself.
As soon as the 2012 parts list is posted on the website for on-line Hyundai Parts Dealers, I will try and determine what components (and part numbers) need to be changed to bring a 2009-2011 Genesis sedan suspension up to 2012 specs.Thanks Mark,
I do have replacement tires on it and it does help but not as much as I would like. I 'll do more research on the suspension. You are probably right on those serial numbers. With the stock market wavering it might be a good time to steal another Genesis.
Probably accurate assessment since some mid-year 2009 changes were made. Bigger difference between early 2009 and 2010.I had 34K miles on a late 2009 4.6; and now have 20K miles on a 2011 4.6 (build date September 2010). I think the 2011 suspension is more composed than the 2009. It rides a bit better/smoother. But these improvements are just marginal, in my opinion.
I believe that is correct also. One of the parts I replaced (I believe rear springs, but don't recall exactly) had the same part number as before, but were softer. But all the other parts I replaced did have different part numbers.I think Hyundai makes many unannounced running changes without changing part numbers. For instance suspension bushings may have changed without new part numbers. Some changes like to sway bars do have different part numbers.
Suspension was upgraded for 2010 model (and now again for 2012). The 2009 was noticeably "bumpier" than 2010-2011 models, which is why I upgaded my 2009 suspension (springs, shocks/struts, and rear stabilizer) to 2010 specs, and feel it is an improvement. With the addition of Michelin tires, I am now satisfied with my 2009 ride characteristics (although 2012 non-R-Spec Genesis is even better).
I installed the Michelin Primacy MXV4. I have the 17" wheels and these tires don't seem to be available in the size used on Genesis 18" wheels.What Did you try the Bridgstone Serienities or the Goodyear comfort Treads. What Michilines did you use? I want whatever is the softest/ smoothing riding / least road noise. Thanks
Did you test drive a R-Spec vs 2012 4.6?The 2009 3.8 and 2012 R-spec are both sedans. I'll look for the post you referenced...I've been doing the same commute for 20 years..Had an Audi, Infiniti M....barely noticed these road joints before...now I get prepared for the road joints and actually let go of the wheel before I go over them. something has to give...
First thing to look at is tire PSI. They are way over-inflated for shipping to US, and sometimes dealer forgets to deflate them during dealer prep. Owner can check tire PSI without going to dealer.Seriously, I suggest having your dealer look at your steering, tires and suspension.