Steering Wheel Clicking Noise

[Jtc527]

That’s exactly what I ended up doing. I just rolled with it in the moment because it made sense. Click free! Thanks for the input. I’m glad I found this in page.

No problem. I work for genesis / Hyundai dealer as a platinum technician. I want to help as much as I can for this community. I own a genesis as well.

 

[jawsakor]

No problem. I work for genesis / Hyundai dealer as a platinum technician. I want to help as much as I can for this community. I own a genesis as well.

Not exactly the same problem, but I have a "growling" noise coming from under driver's seat when it is moving (sometimes). No debris or "stuff" visible. June 2012 4.6L. You might be the right person to give me an idea what to look for. Hopefully not the seat motor or gearbox!

 

[frederickgault]

No problem. I work for genesis / Hyundai dealer as a platinum technician. I want to help as much as I can for this community. I own a genesis as well.

Thanks for your responses. They are most helpful. Currently experiencing this problem on my 2017 G80 Ultimate. Do you think that the dealership would fix it if I went in with the felt and then explained your fix? Or do you think I'm going to have to go somewhere else? Also, what size felt should I get so it will fit in the holes properly? Thanks!

 

[Jtc527]

Thanks for your responses. They are most helpful. Currently experiencing this problem on my 2017 G80 Ultimate. Do you think that the dealership would fix it if I went in with the felt and then explained your fix? Or do you think I'm going to have to go somewhere else? Also, what size felt should I get so it will fit in the holes properly? Thanks!

We have felt that we get fr recalls that we wrap wire looms in to prevent noise transfer. It’s a thin felt. Best description is Velcro but not the hook sided one. I peel off the backing and stick it into the hole where the guide pin goes. You can the them that but most dealership get mad at customers coming in and telling them how to fix it even though it will fix it.

 

[Jtc527]

Do you wrap the pin or line the hole?
Will this work?

JVCC FELT-06 Polyester Felt Tape [1mm thickness felt]: 3/4 in. x 15 ft. (Black) JVCC FELT-06 Polyester Felt Tape [1mm thickness felt]: 3/4 in. x 15 ft. (Black): Amazon.com: Industrial & Scientific

Yes that will work

 

[sandwich]

Not sure if anybody is still active on this thread, but I have a similar issue. Can I remove the airbag without removing trim and panels? or do I need to take everything apart to get to the pins mentioned above?