celltech
Registered Member
Was driving around in my '15 5.0 enjoying the nice weather with the roof fully open. Stopped at the store and tried to shut it only to listen to the motor slowing down and finally reversing 1/2 way through the stroke. I kept playing with it was was able to help it along with my hand and finally got her shut. Came home and started messing with it. It appears to open fine and at normal speed...although it seems like it might not be opening quite all the way??? But closing is a slow, painful, struggle and it won't shut unless I help it along...and even then most of the time the motor trips some current/force/heat limit and opens back up.
I tried the calibration sequence and it will not complete. It's even more messed up than before as the rear tilt is broke, just opens and shuts again.
There is still white grease in the visible part of the tracks and I would lube the whole thing up again but it's so tight I am not sure how I would go about it.
Anyone else been through this???
I tried the calibration sequence and it will not complete. It's even more messed up than before as the rear tilt is broke, just opens and shuts again.
There is still white grease in the visible part of the tracks and I would lube the whole thing up again but it's so tight I am not sure how I would go about it.
Anyone else been through this???