What aftermarket parts are out there for the 2015+ Sedans

[Focusin]

I like the grill and was wondering, was this aftermarket or an application to the existing grill?

In case you missed my post.

 

[rjohnson032]

In case you missed my post.

It is the stock grill, but i just plastic dipped it black! It didn't take too long to pain it.

 

[exaccord]

I apologize if this has been addressed, I searched and couldn't find anything.

What aftermarket intakes are available for either 3.8 or 5.0? I am going to buy a 2015 sedan in the next couple weeks, but availability of aftermarket parts will influence my decision on 3.8 or 5.0.

 

[Huddleston]

I apologize if this has been addressed, I searched and couldn't find anything.

What aftermarket intakes are available for either 3.8 or 5.0? I am going to buy a 2015 sedan in the next couple weeks, but availability of aftermarket parts will influence my decision on 3.8 or 5.0.

None. Any gains would be negligible due to the lack of tuning available.

 

[exaccord]

None. Any gains would be negligible due to the lack of tuning available.

I would be willing to pay for one just for the sound, even if there weren't any gains. Every car I've had previously has has a CAI, and I love the throaty sound they make. I see youre one of the most active members here. Any other advice you can give me, in this regard? Any custom set ups, other systems that would fit, has anyone reached out to manufacturers to gauge interest, etc..

I will be dropping it a few inches and eventually getting wheels, but tinting the windows and putting on an intake are usually the first things I do, since both are relatively cheap.

 

[WHYTE5OH]

I apologize if this has been addressed, I searched and couldn't find anything.

What aftermarket intakes are available for either 3.8 or 5.0? I am going to buy a 2015 sedan in the next couple weeks, but availability of aftermarket parts will influence my decision on 3.8 or 5.0.

Then you will have to go with the 3.8. As there are not many options available for the 5.0. However that being said the 5.0 is a beast and you do not really need much to add. I would love a tune though!

 

[quanva]

i spoke with a gen coupe tuner in the philly area.. the tunes on those cars will work for ours

I plan on getting the tune as well as looking into a CAI..I do want a more aggressive exhaust note..Just haven't figured out the best way to go about it


I'm getting the car lowered soon but everywhere I speak to about doing the work wants 600-800 for the install..Is this normal

 

[Focusin]

It is the stock grill, but i just plastic dipped it black! It didn't take too long to pain it.

I've never been particularly fond of the grill or its neutral color. I'd like to tone it down to a black nickel color similar to the rims.

I'm assuming the colors available are limited so I'm wondering if that effect could be had by applying black as a first coat only?

 

[LandoAWD]

i spoke with a Genesis Coupe tuner in the philly area.. the tunes on those cars will work for ours

SFR? Pass.

 

[dhb220]

The nice thing about having a car on air ride is that i can adjust it. The photos i posted are with the car on the lowest setting. That is only when i am parked. When i drive there is about a 1 finger gap between my tire and vendor. Everyone has their own taste of what they like to do with their car.

Nice looking ride!

______________________________

Help support this site so it can continue supporting you!

 

[exaccord]

Then you will have to go with the 3.8. As there are not many options available for the 5.0. However that being said the 5.0 is a beast and you do not really need much to add. I would love a tune though!

Are there any intake options for the 3.8?

 

[exaccord]

I have been looking all around and am not finding a lot of aftermarket parts for the 2015+ Genesis Sedan. I know the car is rather new so it takes some time for parts to come out. So far I have only been able to find lowering springs and air ride suspension. I recently got a custom Accuair Air Bag with E-Level installed along with some Rotiform SPF wheels. I really am looking for any performance parts that are out there. Here are a few photos of my car so far. If you want more photos check out my Instagram page @Bagged_GenesisSedan.

What did the whole bag system end up costing, labor and everything?

 

[quanva]

SFR? Pass.

what their issue, yes that's the place

 

[xiaphin]

what their issue, yes that's the place

I'd hold off on the tune until BTR offers one.

 

[WHYTE5OH]

Are there any intake options for the 3.8?

Not sure, Check with R2C or AEM maybe?

 

[TbonePdx]

Moderators? Can you just erase all the posts that have nothing to do with the title of the thread?

Tony

 

[exaccord]

Not sure, Check with R2C or AEM maybe?

I emailed Injen and AEM, both said they dont have one. AEM said they would email me if they develop one. Any idea how much a custom one would end up costing?

Moderators? Can you just erase all the posts that have nothing to do with the title of the thread?

Tony

^

 

[OneFunGenesis]

Moderators? Can you just erase all the posts that have nothing to do with the title of the thread?

Tony

Hi Tony,

We have been monitoring this thread and see no reason to remove the off topic posts as they have resolved and we are back on topic. Please reach out to my via private message if you would like to discuss further.

Thanks!

OFG

 

[Dat5.0GenLyfe2016]

I'm right now working on a front and side lip kit for the sedan... Rendering will be done in a couple of days, then off to production. I will keep you guys updated

 

[rjohnson032]

I'm right now working on a front and side lip kit for the sedan... Rendering will be done in a couple of days, then off to production. I will keep you guys updated

Looking forward to seeing the renderings of what you are coming up with! Will it end up being fiberglass?