Genesis Sedan Aluminum Door Inside Catch Plates Now Available!

[Suburbazine]

I like the hairline etched ones so far. Also, the instructions should be ignored. Remove the finger pocket backing and apply the plate with a single spacer. Then reinstall the backing. It fits very flush and doesn't have any bendy feeling:

 

[Gen127]

.... there is almost no GENESIS badge or Emblems inside the car , except the steering wheel .

...and the logos on startup screens, on the front floor mats, illuminated in the door sill plates...and of course, on the puddle lights.

I have little worry of ever forgetting the maker of the vehicle I’m driving.

 

[Sal Collaziano]

...and the logos on startup screens, on the front floor mats, illuminated in the door sill plates...and of course, on the puddle lights.

I have little worry of ever forgetting the maker of the vehicle I’m driving.

You don't see any of that while you're driving or sitting in the passenger seat. I mean, I suppose you could move your feet and see the logo on the floor mats. But you're not going to see the door sill plates or puddle lights.

 

[Gen127]

You don't see any of that while you're driving or sitting in the passenger seat. I mean, I suppose you could move your feet and see the logo on the floor mats. But you're not going to see the door sill plates or puddle lights.

True, while driving the logos aren't ALL visible but you cant help but SEE the 'Genesis' branding while entering, sitting in, and exiting the vehicle. Point being: there's no real shortage of brand identity on the vehicle.
This isn't to diminish the desire of someone wanting branded aluminum door inside catch plates, I was just pointing out Genesis isnt shy about their use of the brand name. Genesis DID remove the logotype from the puddle lights since 2015. Now just the winged crest appears.

 

[Suburbazine]

First Uber of the day remarks on the latch pocket plate being a sign of the luxury level Genesis wanted the car to exude. I concurred.

 

[Sal Collaziano]

First Uber of the day remarks on the latch pocket plate being a sign of the luxury level Genesis wanted the car to exude. I concurred.

View attachment 18830

I have more new and interesting things coming that will get people saying the same thing... Soon...

 

[Gen127]

Just ordered a set.

 

[Sal Collaziano]

Just ordered a set.

Thank you. They just went out of stock this morning and I'm expecting a set in later this week. I'll have your set out to you immediately upon their arrival... Sorry for any inconvenience...

 

[Jamesalanb]

I like the hairline etched ones so far. Also, the instructions should be ignored. Remove the finger pocket backing and apply the plate with a single spacer. Then reinstall the backing. It fits very flush and doesn't have any bendy feeling:
View attachment 18821

That's exactly what the instructions say to do - minus taking the factory backing out...

 

[Suburbazine]

That's exactly what the instructions say to do - minus taking the factory backing out...

It also shows (confusingly) to use double spacers. Only need one spacer and due to the backplate curvature only one spacer will fit in a particular orientation. It's much easier to ensure the backplate is clean when removed, plus ensures best alignment of the aluminum plate. The adhesive is very hard to separate once applied so you only want to do it once.

______________________________

Help support this site so it can continue supporting you!

 

[Sal Collaziano]

Would anyone like to take a shot at typing up a better set of install instructions?

 

[Jamesalanb]

It also shows (confusingly) to use double spacers. Only need one spacer and due to the backplate curvature only one spacer will fit in a particular orientation. It's much easier to ensure the backplate is clean when removed, plus ensures best alignment of the aluminum plate. The adhesive is very hard to separate once applied so you only want to do it once.

I see what you’re saying now. My Korean sheet just shows one spacer but double adhesive. The product is super nice so I don’t care how poor the instructions are, lol.

 

[Jamesalanb]

Would anyone like to take a shot at typing up a better set of install instructions?

Peel adhesive backing from 3M double sided tape and apply to spacer.
Peel tape from spacer and apply to the back of aluminum plate, centering between the letters (side to side)
Remove last backing from 3M tape.
Press firmly to plastic backing in hadle cup.
Enjoy.

 

[FlySwatter]

I ordered this for my 2016 today. Very classy looking IMO.

 

[RyanB]

Got mine very quick after ordering and finally installed them the other day. I must admit that the included instructions were a bit confusing but it was easy enough to figure it out without them. Either way they look great and it's worth the cost.

 

[Gen127]

Got 'em last week & installed them yesterday. Easy-peasy. They look nice.

Now I'll just wait & see if ANYONE who has ridden in the car previously even notices them.

 

[FlySwatter]

Wow, these were indeed shipped fast. And they do look very nice installed. Thanks, Jamesalanb, for the installation hints.

 

[Sal Collaziano]

Wow, these were indeed shipped fast. And they do look very nice installed. Thanks, Jamesalanb, for the installation hints.

Of course! That's how I do things... Speedy shipping is my thing... I'm glad you like 'em!

 

[Scamp]

Little touches like these aluminum interior door handle catch plates are what made Lexus famous – and now they're available for your 2015-2016 Genesis Sedan! Same day shipping makes this set a no brainer for anyone who wants what they buy right away. These are aluminum pieces made in South Korea…

Order here: Aluminum Door Inside Catch Plate 4PC For 2016+ Hyundai Genesis Sedan and Genesis G80 - Genesis Owners

Contradiction? So, they will or won't fit in a 2015?

 

[Suburbazine]

Contradiction? So, they will or won't fit in a 2015?

They fit fine.