mod

If anyone has been struggling with high intake air temperatures I have designed a harness to relocate where the Tmap sensor reads intake air temperatures. The ECU now reads temperatures at the cold side intercooler pipe. The primary benefit of relocating the TMAP sensor is **consistency**...

Hi All, Bought a 2020 3.3L recently, I opted for AWD due to occasional snow. But stuff like this is giving me some buyers remorse: I've seen a few reviews like the one above saying the AWD feels less fun and more reserved than the RWD version. I have a couple Qs: 1. People who have driven...

I looked at several options for Cold Air Intake (CAI) on my new Genesis G70 and ended up going with the AEM setup. I chose AEM as it seemed to have one of the best heat shield setups and dry filters that can be cleaned. I really liked the overall look of their system as well. So far, I am very...

Ok, it has taken me a while but I am close to having a working DRL mod. The two main goals of this project were to retain as much OEM functionality as possible while using the fog lights as my DRL's, and 100% plug and play. My current design will have the following functionality: HB-DRL on ->...

New Owner with a couple of specific questions I hope to get answers for. First post here and am a 3 time Hyundai owner from a 2010 Elantra to a 2013 Sonata Limited and now a 2015 Genesis Ultimate. Like most others I agonized over this fog light issue and vaciliated between the 5.0 and a 2016...

New here. Some basic mods at this point. Door pillars and flying H hood ornament. Next up, mesh grill

Well, my insurance company sent me an OBD module to put on my car to monitor my driving for 90 days in order to get a better discount. When I went to attach it I was dismayed to find that the OBD port (and fuse panel) is covered by a trim panel that butts up very closely to the OBD port. My...

Hey Guys - A while ago, I had posted about how much I personally like "fender badges". A lot of cars have them, and I really think it adds such a classy touch to the side of the car. Like the Cadillac V, the 392 Challengers, the BMW M, any of the Mercedes, etc... Even my 1995 Impala SS, I put...

Hello, Looking for a Chicago area V8 sedan (both 4.6 and 5.0) that is into the mod scene and would be willing to test run an ECU. This is in it's fledgling state at this point, but we are looking to send an ECU for each model to a company in the Chicago area. Once they have cracked and...

O.k. I thought I would start a new thread to keep things clean, as it seems there is no stopping the flood.. So here goes (for nostalgia's sake, per original thread): ************************************************** ************************************************* Disclaimer, * WARNING *...

Used satin 3M vinyl. Took a while to get the shape right. Fits in the indented section between the exhaust. Going to paint the exhaust surrounds in the bumper flat black with BBQ paint. It was a very gray day today. Will try to get better shots when the sun is out.

What u all think?

I just traded a 2012 3.8 GT Genesis Coupe for a new 2013 3.8 premium Genesis.I found that the dead pedal was too low to be comfortable for me at 6 feet tall with a 32 inch pant leg. I saw a few mods here and came up with this solution. I took a piece of 1x4 wood beveled the floor end and...

Morning everyone. Was clicking around another Genesis forum last night and came across this fog light mod for a 2010 coupe. https://www.dropbox.com/s/nkxpm649ne0m5co/Fog%20Light%20Circuit%20Modification.pdf (I had to dropbox the PDF, I can't get the size smaller due to the restrictions the...

Hey Genesis Coupe owners. Right now we're running a sale on our LED Cup Holder Light Mod for your car! This kit works on all year ranges of the Genesis Coupe Step-by-step install instructions can be found under each kit in the section "Product Documents" Let me know if anyone has any questions...

Just thought i would share with yall what i purchased for my geny... Simple and yet unique imo http://bit.ly/12o4GnX http://bit.ly/10QS16K

Saw this at the local dealer today... Wonder if they hacked up a perfectly good R-Spec, or if they pieced together off of salvage vehicles?

The OEM throttle body bore measures about 80 mm. (my recall) on the 4.6 and 82 mm., actual measurement, on the RSpec. Larger throttle bodies have long been a proven, easy, no downside mod. with General Motors LS series motors. For instance my early Z06 5.7 liter motor had a 78 mm throttle...

I just hate people that approach with their high beams on and will not drop to low beams even when flashed.:mad: I thinking of doing a forward lighting mod. You know something to get their attention. I think this might work, but would require some generator and battery mods first.

I recently purchased the 2010 genesis 3.8 and am now looking into throwing a couple mods on it. Nothing crazy just a few things like exhaust bov intake and fmic for now. I am trying to locate some places that can help me out with installing the parts once I purchase them. I don't want to just go...