Nikgen
Been here awhile...
- Joined
- Jul 8, 2014
- Messages
- 2,244
- Reaction score
- 22
- Points
- 0
Get a new dealer.
If you order this part: http://www.ebay.com/itm/171715662714?rmvSB=true
It will give you full OEM fog-light functionality from the drivers seat.
The wiring exists all the way to the front of the car. At the connector on the car side that connects the bumper cover to the car, there are a a pair of orange and black wires dedicated to the fog-lights. Splice into those and add a waterproof connector. Make a new wiring harness that connects that connector to the fog-lights and zip tie it to the existing harness and make a connection to the OEM fog-lights you can order off ebay and you are done.
I was able to get my dealer to install my replacement multi-function switch (turn-signal stalk) for $130. It works as if it was on a 5.0 V8. I'm still pricing out making the new wiring harness to make the final connection.
I bought the whole replacement bumper harness on Ebay along with the multi-function switch.
With that, you can take the bumper off and replace the the entire existing bumper harness (supposedly have to reconfigure pins on the parking sensors, though)
OR
take the new bumper harness apart and just make a fog light sub harness out of it - that way you'll have the same OEM waterproof connectors that fit directly into connectors that are already present on the power harness with the orange/black leads and at the fog lights.
I'm think I'm going to do the second as I'm not big on taking off the bumper and re-configuring the parking sensor connector pins when it is not really necessary. Thee dealer is going to install the switch wen they replace the radio in a few weeks too.