LED Genesis Emblems

[Onuriss]

I randomly stumbled upon these and they look like 2015 emblems.

• LED PREMIUM EMBLEM FRONT FOR HYUNDAI 2014 GENESIS
• LED PREMIUM EMBLEM REAR FOR HYUNDAI 2014 GENESIS

Just thought I'd share...

 

[BRJACKET]

Sorry to hijack your thread (these do look very cool) but I see you are in Mooresville. I am in Charlotte. Where did you get your Genesis and how were they to work with?
Thanks!

 

[Mark_888]

I randomly stumbled upon these and they look like 2015 emblems.

• LED PREMIUM EMBLEM FRONT FOR HYUNDAI 2014 GENESIS
• LED PREMIUM EMBLEM REAR FOR HYUNDAI 2014 GENESIS

Just thought I'd share...

They look like 2014 emblems, as is clearly stated in the listing. I don't think they are OEM parts, but not sure. Also, do they need to be wired to the electrical system?

 

[genesis@genesisworld.com]

Being the LED-aholic that I am, I'll likely go ahead and order them in the coming months. Great find!

I assume they WILL need to be wired into the electrical system, but that won't be too hard to snake a couple of wires deom the hood and the trunk to switched power sources.

 

[Onuriss]

Sorry to hijack your thread (these do look very cool) but I see you are in Mooresville. I am in Charlotte. Where did you get your Genesis and how were they to work with?
Thanks!

Just sent you a message about the dealerships I visited and how awesome Lake Norman Hyundai was.

 

[Onuriss]

Being the LED-aholic that I am, I'll likely go ahead and order them in the coming months. Great find!

I assume they WILL need to be wired into the electrical system, but that won't be too hard to snake a couple of wires deom the hood and the trunk to switched power sources.

Man, you are my hero... Please post pics if you get these.

 

[Midnightsun]

Hold on a minute guys. This really looks like a standard Genesis emblem with a 12v led installed. So basically I am calling a ripoff as this is most likely easily done with a standard emblem. Biggest issue I see is getting 12v to the hood or trunk. My guess would be to shave a pin on the front and use the existing hole for the wires. On the rear we already have shaved the pins so no issue there. Personally I would go with blue and would hook up to the head light function.

Reminds me of when we wanted center caps on the gen 1 that went for a couple of hundred until someone figured out how to do them the same way they were for a few dollars.

 

[radicaltimes]

They have to be wired in, the only draw back is you have to drill a hole for the wires to go thru in the Hood

 

[Midnightsun]

They have to be wired in, the only draw back is you have to drill a hole for the wires to go thru in the Hood

Why not just shave a peg off the emblem and use the existing hole in the hood?

 

[veed]

no hole in hood ...

______________________________

Help support this site so it can continue supporting you!

 

[Midnightsun]

no hole in hood ...

Not on the Gen 1 but would have to assume they have holes on the Gen 2 just like KDM. Pegs are used for alignment and on factory installed items like the hood wings there must be holes.

 

[Nikgen]

The front wings are not mounted on the hood on the Gen 2!

 

[Mark_888]

The front wings are not mounted on the hood on the Gen 2!

But they are right below the hood, right?

 

[genesis@genesisworld.com]

But they are right below the hood, right?

In front of the hood.

 

[Nikgen]

In front of the hood.

Exactly - so likely easier to route power to than if it was actually on the hood (but some disassembly might be required?)

 

[Mark_888]

In front of the hood.

In front of, and slightly below the front edge of the hood, based the photo on the top of this forum.

 

[genesis@genesisworld.com]

I just ordered the front emblem. I'll post how it goes.

 

[jjurado]

Did you get the emblem? How did it go? Did you install it?

Please give us an update.

Thanks

 

[genesis@genesisworld.com]

The emblem has not yet arrived. I will keep everyone posted.

 

[jjurado]

excellent, thanks