I don't know maybe m410 with afsl, but mine is m400 and if you open your hid headlight and look inside you will see two black boxes with 4 wires connected to them
but in Led headlight only one box is there (remove cover with 4 scews,than deatach cooling fan), and this is vertical corrector. Maybe,maybe this one box can move them not only up and down but from side to side...oh I even tried to give money for some korean guy for acsess to genesisclub.co.kr but they all refused because for regestraion you need to provide your korean social id.
from my friend give me once to access genesisclub, I found below post maybe helpful :
안녕하세요?
Full LED 헤드램프 AFLS 연동을 위해서 며칠동안 고생 중입니다..ㅜㅜ
퇴근하고 지하 주차장에서 혼자 작업하는데 마눌님 눈치에 많이 힘드네요^^
우선 이 시스템은 제크리중에서 AFLS 기능이 있는 차량들만 적용이 가능합니다.
이곳 회원님께 헤드램프와 AFLS ECU를 구입하여 작업중입니다.
1.우선 신형 헤드램프와 ECU 장착 후 각종 등화장치 확인을 하였는데 잘 점등 되나
계기판에 AFLS OFF 경고등이 점등됩니다...
2.구형ECU와 신형ECU의 회로도를 비교하여 커넥터 PIN 배열 수정하였습니다.
그 결과 여전히 AFLS OFF 경고등이 점등 됩니다.
3.메뉴얼 검색 결과 ECU 교환시 스캐너를 이용하여 파라메타 다운로드를 시행해야
한다고 합니다. 그래서 지인에게 스캐너를 빌려 파라메타 다운로드를 시행했습니다.
4.AFLS경고등은 삭제 되었으나 시동을 켤때 헤드램프가 상하 세레모니를 하지 않습니
다. 참으로 난감...
5.고장코드 검색 결과 HS-CAN과 LIN 통신은 정상적으로 되나 파라메타 다운로드 값에
이상이 있답니다....(여기서 좌절.............) 고장코드는 요거 하나 뜸...
6.혹시나해서 스캐너 SW Ver을 확인하니 2011년 1월 버젼입니다.... 제페리는 4월 경 출
시가 되었지요...
7.GIT 홈페이지 들어가서 스캐너 버전별 업데이트 내용확인하니 4월버젼에 제페리
AFLS ECU 관련 파라메타 업데이트 내용이 있습니다.
8.4월 버젼이 업데이트되어 있는 스캐너를 구해서 다시 ECU 프로그램을
해봐야 할 듯 합니다....
일단 여기까지 입니다......^^
I tried to use google translator explain but not accurate, seems need to upgrade delaer's diagnosis device to newest version(8.4), and re-program ECU maybe resolve. It's my comprehensive.