• Car enthusiast? Join us on Cars Connected! iOS | Android | Desktop
  • Hint: Use a descriptive title for your new message
    If you're looking for help and want to draw people in who can assist you, use a descriptive subject title when posting your message. In other words, "I need help with my car" could be about anything and can easily be overlooked by people who can help. However, "I need help with my transmission" will draw interest from people who can help with a transmission specific issue. Be as descriptive as you can. Please also post in the appropriate forum. The "Lounge" is for introducing yourself. If you need help with your G70, please post in the G70 section - and so on... This message can be closed by clicking the X in the top right corner.

rear marker plate light bulb replacement

piece

Hasn't posted much yet...
Joined
Jan 2, 2012
Messages
11
Reaction score
0
Points
1
ok i have a 2010 genesis one of the rear maker plate light bulbs is out, how do you change it?tried the 2 phillip screws can't seem to get the light to drop out to change out the bad bulb,do i have to come from the trunk lid?any help is much appreciated.jim
 
ok i have a 2010 genesis one of the rear maker plate light bulbs is out, how do you change it?tried the 2 phillip screws can't seem to get the light to drop out to change out the bad bulb,do i have to come from the trunk lid?any help is much appreciated.jim
I would look at the owner's manual first, and then www.hmaservice.com (no charge for registration).
 
It's a little tricky but it will drop down (use a small jeweler size screw driver to pry it down) and then you can unplug it and separate the clear and black housing to inset the bulb.
 
Looking to update and upgrade your Genesis luxury sport automobile? Look no further than right here in our own forum store - where orders are shipped immediately!
that's the problem dropping it out,straight down or i was able to tip it down but it gets stuck as it is wider in center.thanks again in advance jim
 
You really wont hurt it by forcing it a little. It will come out, but IK what you are saying. It drops a little then gets stuck. Wiggle and pull. It'll come out
 
yeah went at with a couple of picks in the screw hloes and kept the lid vertical so it would drop out easier.thanks to all for the help jim;)
 
Back
Top