G70 Spark Plugs

[Beefer]

I got the USB cable connection instead of the wireless, and it's been pretty dang annoying constantly hooking up my laptop again and again to log runs, change and modify maps, etc. Even so, it is better than nothing! I figure I'll most likely end up going with Bluetooth later on down the road - that said, I probably should have gotten it in the first place.

Yeah...just get it.

 

[BlackedOutG70]

Ive only had 93 octane in it since i got the car, can’t run more than map 1 yet because I still gotta swap the spark plugs which I get that done tomorrow. I’ll tell you my reaction tomorrow when its done lol

Right on !!!! Very cool.

So...what gas is in your tank? No need to mess with any settings...other than selecting your Map.

Settings are for later if you really wanna tweak, etc.

 

[rkar]

Ive only had 93 octane in it since i got the car, can’t run more than map 1 yet because I still gotta swap the spark plugs which I get that done tomorrow. I’ll tell you my reaction tomorrow when its done lol

Let us know how it goes. I'm looking in to getting a JB4 tune as well..

 

[BlackedOutG70]

Getting my spark plugs switched out right now at a Korean shop, they said they have to remove the intake manifold, as most shops say. Hopefully not here too long.

 

[Beefer]

Getting my spark plugs switched out right now at a Korean shop, they said they have to remove the intake manifold, as most shops say. Hopefully not here too long.

They doing the gap?...or did you do it ? I assume Denso's ?

 

[BlackedOutG70]

They doing the gap?...or did you do it ? I assume Denso's ?

Yeah I got the denso’s I told them to gap them at .022 is that right

 

[Beefer]

Yeah I got the denso’s I told them to gap them at .022 is that right

Yeah...Denso 5346 plugs and gapping to 0.022".

 

[BlackedOutG70]

Yeah...Denso 5346 plugs and gapping to 0.022".

Okay they are telling me since they are removing the intake manifold its going to take over 2 hours.... that doesn’t sound right and they close in less than that so no idea what they are doing now?

 

[BlackedOutG70]

is the gapping .022 mm or inches
Nevermind its .022” so inches

 

[Beefer]

Okay they are telling me since they are removing the intake manifold its going to take over 2 hours.... that doesn’t sound right and they close in less than that so no idea what they are doing now?

They said close to 2 hours for me as well. Once my guy got in there (never seen the engine before)...he did it in 1 hour 15 minutes.

______________________________

Help support this site so it can continue supporting you!

 

[Beefer]

is the gapping .022 mm or inches
Nevermind its .022” so inches

0.022”...aka....0.022 inches

 

[BlackedOutG70]

They said close to 2 hours for me as well. Once my guy got in there (never seen the engine before)...he did it in 1 hour 15 minutes.

Ive been here for an hour and a half he’s still putting in the plugs, hasn’t started putting the manifold back on yet lol

 

[Beefer]

Ive been here for an hour and a half he’s still putting in the plugs, hasn’t started putting the manifold back on yet lol

Well...my guy was a fat f$%ker with massive hands...still did it quick. He must have been really good.

What is their hourly rate? Or did they do it for a flat fee? Mine guy was $80/hour. So I think I paid $130 after it was all done.

 

[BlackedOutG70]

Well...my guy was a fat f$%ker with massive hands...still did it quick. He must have been really good.

What is their hourly rate? Or did they do it for a flat fee? Mine guy was $80/hour. So I think I paid $130 after it was all done.

Honestly I didn’t even ask, I remember it’s a flat fee depending on the task. I just want it done with to be honest.

 

[Beefer]

Honestly I didn’t even ask, I remember it’s a flat fee depending on the task. I just want it done with to be honest.

Remember to ask for your original plugs back. I did.

 

[BlackedOutG70]

Remember to ask for your original plugs back. I did.

Thanks for the reminder, didn’t even think about that.

 

[BlackedOutG70]

So it took 2 hours... they charged me $213

 

[Beefer]

So it took 2 hours... they charged me $213

Oh well...expensive rate. It’s done. Now enjoy!!! Give us updates.

 

[CoconutRob]

Well...my guy was a fat f$%ker with massive hands...still did it quick. He must have been really good.

What is their hourly rate? Or did they do it for a flat fee? Mine guy was $80/hour. So I think I paid $130 after it was all done.

Lol

 

[BlackedOutG70]

Definitely can feel the difference low end speed, is their a way to monitor turbo psi through the jb4 app, on my car gauge im running map 2 and it shows me less than 15 psi is it incorrect?