Post your custom wheels

[danslides]

Wheels whores anonymous memberships now available.

Can't believe there's isn't a thread like this already.

POST AWAY!

 

[Zerkfitting]

I looked at a lot of wheels when I was looking for a set and it would have been nice to see what wheels like on the car. I ended up getting Enkie G5 wheels.


http://www.genesisowners.com/hyunda...ment.php?attachmentid=2365&stc=1&d=1358124017

 

[OneFunGenesis]

Can we also pose specs please?

 

[Southern Boy]

These wheels are TSW Snetterton Chrome 18X9.5C40. If you would lke a deeper dish on the out side than choose a smaller offset.

If you go to http://www.discounttiredirect.com/direct/interactive.do you can see what any wheels will look like on your car.

This hyperlink will show you more detail and info about the TSW Snetterton wheels.

http://www.discounttiredirect.com/direct/wheels/tsw/product/byName.do?tmn=Snetterton&typ=Car/Minivan

 

[superreggie]

I looked at a lot of wheels and I went with these. They are a 19" staggered set by Braelin.
I like how the rear has a bit of a concave

 

[OneFunGenesis]

I will say this again, PLEASE post specs of your wheels. If you are not familiar with "specs" they would be the:

Brand
Submodel
Size
Offset
Tire Size
Any Spacers Used

Thank you.

 

[Jalexe]

I looked at a lot of wheels and I went with these. They are a 19" staggered set by Braelin.
I like how the rear has a bit of a concave

like these...do they have these in 20's?

 

[superreggie]

like these...do they have these in 20's?

yes they do have them in 20". they also have a couple more finishes

 

[xiaphin]

I looked at a lot of wheels and I went with these. They are a 19" staggered set by Braelin.
I like how the rear has a bit of a concave

Those are similar to 2008 G35 Sedan Sport wheels. But with less spokes. Did a double take initially.

I will say this again, PLEASE post specs of your wheels. If you are not familiar with "specs" they would be the:

Brand
Submodel
Size
Offset
Tire Size
Any Spacers Used

Thank you.

What he said ↑↑↑. Thread is useless without specs. And pics of course

 

[Curtyrut]

I looked at a lot of wheels and I went with these. They are a 19" staggered set by Braelin.
I like how the rear has a bit of a concave

Hello, sweet looking rims and your ride looks good also. Where did you purchase the rims?

Thanks.

______________________________

Help support this site so it can continue supporting you!

 

[Bernie]

A few years ago, I posted a number of photoshoped wheels in this album. Have a look

http://www.genesisowners.com/hyundai-genesis-forum/album.php?albumid=212

 

[Curtyrut]

A few years ago, I posted a number of photoshoped wheels in this album. Have a look

http://www.genesisowners.com/hyundai-genesis-forum/album.php?albumid=212

Thanks Bernie, you are the man! Although the selections are good, they do not come close to what you have selected. Also, my favorite two were the MRR HR1 and Konkae 1.

Thanks again for re-posting, this really helps.

 

[SmoovC]

Not my car or wheels, but I saw this at the Dealer I do service with:

After some research, I believe they are:

Brand: Status Alloy Wheels / Ruff Racing Alloy Wheels
Submodel: R954
Size: 22" x9"
Offset: ?
Tire size: 245/30/22.
Spacers: Did not appear to be

 

[superreggie]

I will say this again, PLEASE post specs of your wheels. If you are not familiar with "specs" they would be the:

Brand
Submodel
Size
Offset
Tire Size
Any Spacers Used

Thank you.

sorry about that.

Wheels - Braelin, BR02
Size - 19x8.5 front 19x10back
offset - not sure but these wheels were made vehicle specific, like all Braelin wheels of I'm not mistaken.
Tires - michelin pilot sport plus 245/45-19 front 275/40-19 back

here's another pic

 

[superreggie]

Hello, sweet looking rims and your ride looks good also. Where did you purchase the rims?

Thanks.

I purchased them from the hyundai dealer near my house. I live in Toronto though. Braelin is a canadian company but there's there's a company named Ace Alloy that makes an almost identical wheel, the model name is convex. Check those out

 

[Curtyrut]

Ok, here are the wheels that I am leaning towards purchasing. I am going with the offset 20 x 8.5, +35 and 20 x 10, +40 (have no idea what the +35 and 40 means) Also, tires would be the Hankook Ventus V12 evo K110 front 245/40/20 and the rear 275/40/20. Do you believe this will fit without any modifications? I am willing to sell my Rspec rims/wheels (245/40/19 Conti) that has under 2K miles and are in excellent condition once I settle on what rims I am purchasing. Comments are welcome

 

[EXBMWGUY]

I'd strongly encourage you to consider more than just physical dimensions, which of course is the place to start.

Manufacturing method: there are at least several kinds of ways to produce alloy wheels: gravity casting (the lowest quality), low pressure casting, high pressure casting, and forging (the highest quality).

Weight: Heavy wheels make crisp, precise handling difficult because of high unsprung weight. Forged wheels are much more expensive than cast wheels and they are the lightest and strongest by weight. Wheel strength and quality are most important when low profile tires are used, which most people are doing when they change wheels in the first place. Potholes destroy more cheap (even OEM) wheels than you can imagine when combined with ultra low-profile wheels. I have lost two Audi factory wheels and one BMW wheel that way.

 

[OneFunGenesis]

Typically I would agree with you. But this thread is in the Appearance section of tires and wheels section. If this were the performance section, I would be right there with you

 

[Bernie]

Thanks Bernie, you are the man! Although the selections are good, they do not come close to what you have selected. Also, my favorite two were the MRR HR1 and Konkae 1.

Thanks again for re-posting, this really helps.

Amongst the photoshoped images I had posted, I had the Estoril wheels. Here's a comparison of the wheels photoshoped on an image of a Genesis versus the real thing on my car. Pretty close... don't you think

 

[Curtyrut]

Hey Burnie, if possible, can you photoshop the following:


I am leaning towards purchasing Niche Mugello that are concaved rims or vertini which are identical